Piezoresistive accelerometer • Exceptional frequency • Adhesive mount • 10 feet of integral cable The 727 is an extremely Lightweight piezoresistive accelerometer designed to measure shock during the drop testing of consumer electronic devices. Available in 2kg, 6kg, 20kg and 60kg ranges, the 727 can measure shocks in g ranges well above current drop test sensors. It is designed to be mounted with adhesive, and at only 0.3 grams for the accelerometer body and 1.1 grams per foot for the cable, mass loading to the test object is minimal. The 727 has exceptional frequency response, from DC- 10kHz for 2kg range up to DC-100kHz for the 60kg range, to capture the entire frequency range of interest. The standard unit comes with an A2LA certified calibration taken at 10 volts and 120 inches PLATED CONDUCTORS WITH SPC SHIELD AND FLOURO CARBON JACKET -SERIAL NUMBER THIS SURFACE POSITIVE OUTPUT extreme environments

Piezoresistive accelerometer All specifications assume +75°F (+24°C). Calibration data, traceable to National Institute of Standards and Technology (NIST), is supplied. Dynamic characteristics Units 2K 6K 20K 60K Meggitt [Orange County) Inc. Electrical characteristics Voltage supply Vdc 2 to 12 (10 V standard; Environmental characteristics Temperature range Physical characteristics Sase material AL 6061-T6, hard anodizec Sable 36 AWG SPC, braided shield, FEPjacket Sable weight oz/ft 0.04 Please refer to IM727 for mounting and de-mounting instructions. 42894 Removal tool Included 126 Signal conditioner...