Catalogs >
Endevco >
Endevco® Model 40931 Micro-miniature ?Flip-Chip? MEMS Pressure Transducer Die

Endevco® Model 40931 Micro-miniature ?Flip-Chip? MEMS Pressure Transducer Die
1 / 2Pages

Catalog excerpts

Endevco® Model 40931 Micro-miniature ?Flip-Chip? MEMS Pressure Transducer Die - 1

Model 40931 Silicon MEMS pressure sensor Features • Microminiature pressure die • 15 psia full scale range • Designed for surface mount installation • Ideal for medical OEM applications The Endevco® brand model 40931 flip chip is a unique silicon pressure sensor designed to address applications where micro-miniature size is required. The unit measures only 1.65 mm long by 1.2 mm wide by 0.4 mm tall. Four connection pads allow for the sensor to be “flip chip” mounted to a circuit or substrate using conductive epoxy. The top of the sensor represents the active sensing element for measurement of absolute pressures. The sensor has a full scale range of 0-15 psia, and a nominal 200 mV full scale output when powered using a sensor excitation of 5 Vdc. A uniquely sculptured diaphragm provides high sensitivity, high overpressure capability and excellent linearity.

Open the catalog to page 1

Endevco® Model 40931 Micro-miniature ?Flip-Chip? MEMS Pressure Transducer Die - 2

Silicon MEMS pressure sensor SilreSSlS CERTIFIED PERFORMANCE: All specifications assume +75°F |+24°C] and 5 Vdc excitation unless otherwise stated Output for 14.5 PSI change mVTyplMin] 125.0-250.0 Combined non-linearity Supply voltage Vdc 5 recommended, 12 maximum Electrical configuration Four-arm piezoresistive bridge Polarity Positive output for increasing pressure Output A fill II I ^'oljQ [Hiqher resistance available as special order] Mounting Wire bond, or conductive epoxy Environmental characteristics Temperature range °F(°C] -47°F to +212°F |-55°C to +100"C] Media resistance Sensor...

Open the catalog to page 2