*mydirectindustry

Data sheet AR

1 / 3 PagesView full catalog

Data sheet AR

Product catalog summary

Technical Specifications

Design: The swing check valve features a two-part body construction that is screwed together.
Connection: Available with female threads ranging from ½" to 2" (DIN 2999).
Mounting Position: The bonnet should be positioned on top, and the flow direction must be observed.
Media: Suitable only for liquid media.
Pressure Range: PN16.
Temperature Range: -20°C to +180°C.
Materials: The body and bonnet are made of stainless steel 1.4408, with metal seat seals and PTFE plug and cap seals.

Ordering Information

Product code example: AR300025, which denotes a swing check valve made of stainless steel with a metal seal and a female B.S.P. thread of size G1".
Digits in the product code specify product type, material, operation, options, and connection size.

Parts List

The main components include the body, cap, flap, shaft, and plug, all made of stainless steel 1.4408, with PTFE used for the cap and plug seals.

Dimensions and Weights

Dimensions vary based on connection size, with diameters (ØD) ranging from 15mm to 48mm, lengths (L) from 60mm to 122mm, and heights (H) from 41.5mm to 67mm.
Weights range from 0.20 kg to 1.60 kg depending on size.
Opening pressure is consistent at 0.015 to 0.02 bar.

Compliance Note

The products described are not classified as machinery or partly completed machinery under the directive 2006/42/EC on machinery.

Catalog excerpts

Technische Daten BAUFORM 2-teilige Körperkonstruktion (verschraubt) DESIGN Body consists of two screwed parts CONNECTION female thread: ½"… 2" (DIN 2999) EINBAULAGE Deckel nach oben, Durchﬂußrichtung beachten. MOUNTING POSITION Bonnet on the top, please refer to ﬂow direction. DURCHFLUSSMEDIUM Nur für ﬂüssige Medien. MEDIA Only for liquid media. WERKSTOFFE Gehäuse: Deckel: Sitzdichtung: Stopfendichtung: Deckeldichtung: Edelstahl 1.4408 Edelstahl 1.4408 metallisch PTFE PTFE Alle Angaben sind freibleibend und unverbindlich! MATERIAL Body: Bonnet: Seat seals: Plug seal: Cap seals: Stainless steel 1.4408 Stainless steel 1.4408 metal PTFE PTFE The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! Type: AR Swing check valve PN16 Dok.-Nr.: KAT-AR-1/3 - 20.03.2012 - Änderung: Baulängen geändert Stainless steel Art. AR - Seite 1/3 END-Armaturen GmbH & Co. KG Postfach (PLZ 32503) 100 341 · Oberbecksener Str. 78 · D-32547 Bad Oeynhausen · Telefon (05731) 7900-0 · Telefax (05

Open the catalog to page 1

Artikel- u. Bestellangaben: z.B. AR300025 = Rückschlagklappe, Edelstahl, metallisch dichtend, Innengewinde G1" 1.+ 2. Stelle Produkt 3.+ 4. Stelle Werkstoffe Gehäuse / Dichtung 30 = Edelstahl / Edelstahl Ordering example: e.G. AR300025 = Swing check valve, stainless steel, matal-sealing, female B.S.P. thread, G1" 1.+ 2. Digit Product AR = Swing check valve 3.+ 4. Digit Material Body / Seal 30 = Stainless steel / Stainless steel 7.+ 8. Digit Connection size Bezeichnung / Desciption Gehäuse Body Deckel Cap Deckeldichtung Cap seal Klappe Flap Achse Shaft Stopfen Plug Stopfendichtung Plug seal Edelstahl...

Open the catalog to page 2

Abmessungen / Dimension : Öffnungsdruck/ opening pressure Dok.-Nr.: KAT-AR-3/3 - 20.03.2012 - Änderung: Baulängen geändert Hinweis Bei den in dieser Dokumentation beschrieben Produkten, in der von uns gelieferten Form, handelt es sich weder um Maschinen gemäß Artikel 2 Absatz a noch um unvollständige Maschinen gemäß Artikel 2 Absatz g im Sinne der Richtlinie 2006/42/EG über Maschinen. Advice The products descript in this documentation in the conditions of our delivery are no machinery according to annex 2 paragraph a respectively no partly completed machinery according to annex 2 paragraph g...

Open the catalog to page 3

Data sheet AR

Data sheet AR

Catalog excerpts

All END-Armaturen GmbH & Co. KG catalogs and technical brochures

Archived catalogs