AEM Electrolyser

Product catalog summary

Overview: The AEM Electrolyser EL 4.0 by Enapter is a patented anion exchange membrane electrolyser designed for on-site hydrogen production. It features a modular, stackable design with advanced software integration for quick setup and remote management.

Specifications:

Production Rate: Up to 500 NL/h, equivalent to 1.0785 kg/24 h.
Hydrogen Output Purity: 99.9% at 35 barg and 98.8% at 8 barg, both at 25 °C.
Output Pressure: Up to 35 barg.
Power Consumption: Nominal power is 4.8 kWh/Nm³, operative power is 2.4 kW, and peak power is 3 kW.
Heat Dissipation: Ranges from 0.6 kW to 0.9 kW from beginning to end of life.
Standby Power Consumption: 0.3 kW.
Power Supply: 220 – 230 V (AC), 50/60 Hz.
Water Input: Maximum conductivity of 20 µS/cm at 25 °C, consumption of ~420 mL/h, and pressure range of 1 – 4 barg.
Operating Conditions: Temperature range of 5 °C – 45 °C and humidity up to 90% non-condensing.
IP Rating: IP 20.
Dimensions and Weight: 482 mm × 635 mm × 266 mm, weighing 42 kg.
Control and Monitoring: Fully automatic via Enapter’s EMS with Wi-Fi and Bluetooth, Modbus TCP over Ethernet.
Conformity: CE and UKCA marked, compliant with relevant safety regulations.

Key Features: The electrolyser is designed for flexibility and efficiency, allowing for easy scalability and integration into various hydrogen production setups. It is equipped with advanced control systems for optimal performance and safety.

Catalog excerpts

Enapter’s patented anion exchange membrane (AEM) electrolyser is a standardised, stackable and flexible system to produce on-site hydrogen. The modular design – paired with advanced software integration – allows set up in minutes and remote control and management. Stack this electrolyser to achieve the required hydrogen flowrate.

Open the catalog to page 1

Production rate Hydrogen output purity Output pressure Nominal power consumption per Nm³ of H₂ produced 4.8 kWh/Nm³, beginning of life Operative power consumption Peak power consumption Heat dissipation Max heat dissipation 0.6 kW, beginning of life 0.9 kW, end of life Power supply Maximum water input conductivity Water consumption Water input pressure range Ambient operative temperature range Ambient operative humidity range Space inside cabinet Fully automatic with Enapter’s EMS via 2.4 GHz Wi-Fi and Bluetooth, Modbus TCP over Ethernet CE mark according to the machine directive 2006/42/CE2...

Open the catalog to page 2

AEM Electrolyser

AEM Electrolyser

Catalog excerpts

All Enapter catalogs and technical brochures

Archived catalogs