AEM EL 4.1
AEM EL 4.1
- Production Rate: Up to 500 NL/h, equivalent to 1.0785 kg/24 h.
- Hydrogen Output Purity: At 35 barg, 99.9% purity; at 8 barg, 98.8% purity.
- Output Pressure: Up to 35 barg.
- Power Consumption: 4.8 kWh/Nm³ for nominal, 2.4 kW operative, 0.6 kW heat dissipation, 0.03 kW standby.
- Power Supply: 208 – 240 V (AC), 50/60 Hz.
- Water Requirements: Type II water, ~420 mL/h consumption, 1 – 4 barg input pressure.
- Operating Conditions: Temperature range 5 °C – 45 °C, humidity up to 90% non-condensing.
- Dimensions and Weight: 482 mm × 635 mm × 266 mm, 42 kg.
- Control and Monitoring: Fully automatic via Enapter’s EMS, Wi-Fi, Bluetooth, and Modbus TCP.
- Conformity: CE, UKCA, and CSA/ANSI B22734:2023 certifications.
Catalog excerpts
Enapter’s patented anion exchange membrane (AEM) electrolyzer is a standardised, stackable and flexible system to produce on-site hydrogen. The modular design – paired with advanced software integration – allows set up in minutes and remote control and management. Stack this electrolyzer to achieve the required hydrogen flowrate.
Open the catalog to page 1
Enapter AEM Electrolyzer EL 4.1 Air Cooled AC Production rate Hydrogen output purity 35 barg (508 psig): 99.9% (< 1,000 ppm H₂O and < 5 ppm O₂) at 25 °C (77 °F) 8 barg (116 psig): 98.8% (< 12,000 ppm H₂O and < 5 ppm O₂) at 25 °C (77 °F) Output pressure Nominal power consumption per Nm³ of H₂ produced 4.8 kWh/Nm³, beginning of life Operative power consumption Heat dissipation Standby power consumption¹ Power supply 208 – 240 V (AC), 50/60 Hz, both split phase and 3-phase H₂O inlet purity (recommended) Type II Water Acidity < 0.1 meq/l Water consumption Water input pressure range Ambient operative...
Open the catalog to page 2All Enapter catalogs and technical brochures
AEM FLEX 1202 Pages
AEM NEXUS 10002 Pages
Energy Management System Toolkit13 Pages
Archived catalogs
AEM Electrolyser2 Pages
Energy Common Knowledge10 Pages
Master Landscape Plan6 Pages
AEM Multicore2 Pages