3400 SOFT POLYESTER FILLER

Product catalog summary

Technical Description:
The document describes a two-component polyester basic filler known as 3400 Soft Polyester Filler. It is VOC compliant, offers good adhesion and elasticity, dries quickly, and is easy to sand. The hardener paste is mixed at 3% with a pot life of 4 minutes at 23°C, and it can be dried in 20-30 minutes at the same temperature or 5-8 minutes with infrared drying.

Product Application:
The application involves cleaning the surface with EN 7400 Anti-Silicon Degreaser, ensuring the surface is well-hardened, sanded, and suitable for steel, polyester, or wooden surfaces. The filler is applied with a spatula and should not be force-dried. Protective equipment is recommended during application.

Specifications:
- Flash Point: 31°C / 88°F
- Specific Gravity: 1.90 g/cm³
- Solid Content: 87% by weight
- VOC: Max 130 g/l in ready-to-use form, complying with EU limits
- Shelf Life: 12 months in sealed containers

Recommendations and Warnings:
- Mix only with EN Hardener and do not exceed 3% to avoid staining.
- Avoid application on TPA substrates and soft old paintwork.
- Do not apply below +5°C.
- Hardener paste contains organic peroxide; handle with care to avoid skin and eye contact.
- For professional use only, and users should verify the information for their specific needs.

Additional Information:
The document emphasizes that the information is based on laboratory research and is for informational purposes only. Users are responsible for checking updates and ensuring the information suits their purposes. Intellectual property rights are reserved, and the company may modify the information without notice.

Catalog excerpts

Product Description: • VOC compliant Technical Data Sheet 3400 SOFT POLYESTER FILLER Technical Description: 3% EN Hardener paste Potlife: 4min / 23°C • Two component polyester basic filler • Good adhesion and elasticity • Dries quickly • Easy to sand IR drying 5-8

Open the catalog to page 1

Pretreatment: Clean surface with a soft cloth and EN 7400 ANTI-SILIKON DEGREASER Surface: • Well hardened sanded paintwork • Steel, Polyester, Wooden surfaces Product Application: Technical Data Sheet EN 3400 SOFT POLYESTER FILLER 3% with EN HARDENER PASTE Potlife: 4min / 23°C Apply with spatula Store in a cool place. Product application should be done in accordance to this Technical Data Sheet

Open the catalog to page 2

Flash Point: Clean after use with ΕΝ 7100 SOLVENT NORMAL Specific Gravity: • Mix only with EN Hardener. Do not add more than 3% as this may cause staining of the topcoat finish. Solid Content (No thinner): 87% Weight • Do not apply to TPA substrates and soft old paintwork. • Do not apply at temperatures below +5°C. • Polyester materials have a limited shelf life. Store in a cool place. Shelf life of 12 months in sealed containers. The EU limit value for this product category in ready for use form is max 250 g/l of VOC. The VOC value of this product in ready for use form is max. 130 g/l. Theoretical...

Open the catalog to page 3

3400 SOFT POLYESTER FILLER

3400 SOFT POLYESTER FILLER

Catalog excerpts

All EN Chemicals S.A. catalogs and technical brochures