POLYESTER FILLER Product Description: • VOC compliant Technical Data Sheet Technical Description: 2-3% EN Hardener paste Potlife: 4-5min / 23°C • Two component universal PE filler • Good vertical stability 20 - 30min / 23°C • Easy to sand • Pore free surface IR drying 5-8

Pretreatment: Clean surface with a soft cloth and EN 7400 ANTI-SILIKON DEGREASER Surface: • Well hardened sanded paintwork • Galvanized steel • Stainless steel • Bare metal and aluminium • Polyester - Glass fiber • Wooden surfaces Product Application: Technical Data Sheet EN 3300 UNIVERSAL POLYESTER FILLER 3% with EN HARDENER PASTE Potlife: 4min / 23°C P80 – P120 gives a fine, non porous surface Apply with spatula Store in a cool place. Product application should be done in accordance to this Technical Da

Flash Point: Clean after use with ΕΝ 7100 SOLVENT NORMAL Specific Gravity: • Mix only with EN Hardener. Do not add more than 3% as this may cause staining of the topcoat finish. Solid Content (No thinner): 87% Weight • Do not apply on Etch Primer, 1K Filler, TPA substrates and soft old paintwork. • Do not apply when temperatures below +5°C. Technical Data Sheet EN 3300 UNIVERSAL POLYESTER FILLER • Polyester materials have a limited shelf life. Store in a cool place. Shelf life of 12 months in sealed containers. The EU limit value for this product category in ready for use form is max 250 g/l...