2100RAPID SEALANT

Product catalog summary

Product Description:
EN 2100 Rapid Sealant is a rubber and solvent-based sealant with anticorrosive properties. It is designed to prevent shrinking and cracking, offering excellent adhesion to primed metal and painted surfaces.

Product Application:
The sealant can be applied using a cartridge gun or brush. It requires a flash-off time of 15-20 minutes at 23°C and a drying time of 2-3 hours at the same temperature for a thickness of 200μm. It is compatible with 2K acrylic, synthetic, and basecoat paints. Surfaces should be cleaned and primed before application.

Specifications:

Flash Point: -26°C / -15°F
Specific Gravity: 1.10 g/cm³
Solid Content: 61% by weight
VOC: Max 280 g/l (EU limit is 840 g/l)

Recommendations:

Protect from humidity and close the tin after use.
Use protective equipment during application.
Store in a cool place with a shelf life of 24 months in sealed containers.
Clean equipment after use with EN 7100 Solvent Normal or EN 7700 Nitro Thinner.

Additional Information:
The product is suitable for filling and sealing visible joints and seams against corrosion. It can be used in countries not adopting VOC legislation. The information provided is based on laboratory research and is for informational purposes only. Users should verify the data for their specific needs and check for updates.

Catalog excerpts

Technical Data Sheet Product Description: • Rubber and solvent based sealant • Anticorrosive properties • Non shrinkink - Non cracking • Excellent adhesion to primed metal and painted surfaces

Open the catalog to page 1

Pretreatment Cleaning: Surface: • Primed metal • Painted surfaces • Interior of car doors • Engine compartments • Head light interiors Product Application: Technical Data Sheet Apply with a cartridge gun Protect from humidity or Application with brush Product application should be done in accordance to this Technical Data Sheet 2K Acrylic Paints Synthetic Paints Basecoat P

Open the catalog to page 2

Flash Point: Clean after use with ΕΝ 7100 SOLVENT NORMAL ΕΝ 7700 NITRO THINNER Remarks: • Allow additional time for preheating up to panel temperature Solid Content (No thinner): 61% Weight • Suitable for filling and sealing visible joint and seams against corrosion Technical Data Sheet • It can be used by countries that do not adopt the VOC legislation as well. • Store in a cool place. Shelf life of 24 months in sealed containers. The EU limit value for this product category in ready for use form is max 840 g/l of VOC. The VOC value of this product in ready for use form is max. 280 g/l. Theoretical...

Open the catalog to page 3

2100RAPID SEALANT

2100RAPID SEALANT

Catalog excerpts

All EN Chemicals S.A. catalogs and technical brochures