1300 CAVITY WAX PROTECTION

Product catalog summary

Product Description:
EN 1300 Cavity Wax Protection is a wax-based coating designed for easy penetration into hard-to-reach areas. It dries quickly while remaining elastic and provides excellent moisture protection.

Product Application:
Before application, shake the product well for 2-3 minutes. It can be applied using an underseal spray gun with a nozzle size of 4-5mm and a pressure of 5-6 bar, or with a brush. The drying time is approximately 40 minutes at 22-25°C. Ensure the tin is closed after use and protective equipment is worn. Follow the guidelines in the Technical Data Sheet for application.

Specifications:

Flash Point: -26°C / -15°F
Specific Gravity: 0.81 g/cm³
Solid Content: 35% (No thinner)
VOC: Max 535 g/l (EU limit is 840 g/l)

Additional Information:

Apply the product after painting.
Allow additional time for preheating to panel temperature.
Can be used in countries not adopting VOC legislation.
Store in a cool place with a shelf life of 24 months in sealed containers.

Cleaning:
Clean equipment after use with EN 7100 Solvent Normal or EN 7700 Nitro Thinner.

Remarks:
The information is based on the best knowledge at the time of issue and is for informational purposes only. Users should verify updates or further information as needed. Intellectual property rights are reserved.

Catalog excerpts

Technical Data Sheet Product Description: • Wax based coating. • Easily penetration into hard accessed points. • Fast drying while remaining elastic • Excellent protection against moisture.

Open the catalog to page 1

Product Application: Shake well before use 2-3min Underseal Spray gun Nozzle: 4 – 5mm Pressure: 5-6 bar or Application with brush Technical Data Sheet Product application should be done in accordance to this Technical Data Sheet

Open the catalog to page 2

Flash Point: Clean after use with ΕΝ 7100 SOLVENT NORMAL ΕΝ 7700 NITRO THINNER Remarks: • Apply the product after the paint Solid Content (No thinner): • Allow additional time for preheating up to panel temperature Technical Data Sheet • It can be used by countries that do not adopt the VOC legislation as well. • Store in a cool place. Shelf life of 24 months in sealed containers. The EU limit value for this product category in ready for use form is max 840 g/l of VOC. The VOC value of this product in ready for use form is max. 535 g/l. Theoretical Coverage: - For professional use only. The information...

Open the catalog to page 3

1300 CAVITY WAX PROTECTION

1300 CAVITY WAX PROTECTION

Catalog excerpts

All EN Chemicals S.A. catalogs and technical brochures