1200BITUMINOUSUNDERBODY COATING

Product catalog summary

Product Description: The EN 1200 Bituminous Underbody Coating is a bitumen-based product designed to provide effective protection against rust and corrosion. It remains elastic and offers perfect adhesion but is non-paintable.

Product Application: The coating should be stirred well before use and can be applied using an underseal spray gun with a nozzle size of 4-5mm at a pressure of 5-6 bar, or with a brush. It requires 10-20% EN 7700 Nitro Thinner for application. The drying time is 2-6 hours at 22-25°C or 30 minutes at 60°C. It is important to protect the product from humidity, close the tin after use, and use protective equipment during application.

Technical Specifications: The product has a flash point of less than 0°C, a specific gravity of 1.07g/cm³, and a solid content of 60% by weight. The VOC value in ready-to-use form is a maximum of 350 g/l, which is below the EU limit of 840 g/l for this product category. Theoretical coverage is not specified.

Additional Information: Equipment should be cleaned after use with EN 7100 Solvent Normal or EN 7700 Nitro Thinner. The product should be stored in a cool place and has a shelf life of 24 months in sealed containers. It can be used in countries that do not adopt VOC legislation. Users should allow additional time for preheating up to panel temperature.

Disclaimer: The information provided is based on laboratory research and is for informational purposes only. Users are responsible for checking for updates or further information as needed. The intellectual property rights are protected, and the company reserves the right to modify or discontinue information without notice.

Catalog excerpts

Technical Data Sheet 1200 BITUMINOUS UNDERBODY COATING Product Description: • Bitumen based coating. • Effective protection against rust and corrosion. • Remains elastic with perfect adhesion. • Non paintable.

Open the catalog to page 1

Technical Data Sheet EN 1200 BITUMINOUS UNDERBODY COATING Product Application: Stirring well before use Protect from humidity Underseal Spray gun Nozzle: 4 – 5mm Pressure: 5-6 bar or Application with brush Product application should be done in accordance to this Technical Data Sheet

Open the catalog to page 2

Technical Data Sheet EN 1200 BITUMINOUS UNDERBODY COATING Flash Point: Clean after use with ΕΝ 7100 SOLVENT NORMAL ΕΝ 7700 NITRO THINNER Remarks: • Allow additional time for preheating up to panel temperature Solid Content (No thinner): 60% Weight • It can be used by countries that do not adopt the VOC legislation as well. • Store in a cool place. Shelf life of 24 months in sealed containers. 2004/42/IIB(e)(840)350 The EU limit value for this product category in ready for use form is max 840 g/l of VOC. The VOC value of this product in ready for use form is max. 350 g/l. Theoretical Coverage:...

Open the catalog to page 3

1200BITUMINOUSUNDERBODY COATING

1200BITUMINOUSUNDERBODY COATING

Catalog excerpts

All EN Chemicals S.A. catalogs and technical brochures