Catalogs >
EMUGE-FRANKEN >
EMUGE SWITCH-MASTER® 16 MV

EMUGE SWITCH-MASTER® 16 MV
6Pages

Catalog excerpts

Clamping Technology EMUGE Tapping Attachment SWITCH-MASTER ® 16 MV

Clamping Technology Application Range and Characteristics Application Range and Characteristics The SWITCH-MASTER ® tapping attachment has been designed for use on CNC-controlled machines. Owing to the integrated reverse gear mechanism, the change of rotation of the machine spindle is no longer needed. Normally the tapping attachments type SWITCH-MASTER ® are made for the production of right-hand threads. However, on request the attachment can be produced also for left-hand threads. The turning direction of the machine spindle remains right-turning in both cases. For the use of the tapping...

Open the catalog to page 2

Function the rotating direction (reverse). After the tool leaves the produced thread, the spring-loaded tool adaptation clamping head is pulled back into its initial position and the tool again changes the rotating direction. The auxiliary energy - “compressed air” required for the switching procedure must be available permanently with 6 +1 bar at the -0,5 tapping attachment during the whole machining process. During the complete thread producing cycle the machine spindle rotates right-hand. After reaching the programmed feed depth the Z-axis switches to reverse without dwell time. In the...

Open the catalog to page 3

Clamping Technology Tapping with SWITCH-MASTER ® Blind hole Blind hole Blind hole Thread depth Machining level Machine type Tap hole shape Tapping with synchronous spindle Machining time and costs per component for 40 thread bores Conventional tapping attachment Synchronous spindle Conventional tapping attachment SWITCH-MASTER® Calculation of the “break even point” Machining costs (for 40 thread bores) Machine pay per hour: 100 0/hour Tapping with SWITCH-MASTER ® Machining time (for 40 thread bores) Tapping with conventional tapping attachment Potential cost savings by use of SWITCH-MASTER...

Open the catalog to page 4

Clamping Technology Technical Data Technical Data Model 90° Stop block for assembly on the machine Stop xture Stop block for assembly on the machine Stop xture Ordering example: SWITCH-MASTER 16 MV 180° - D 25 - DIN 1835 B+E Article number: F3381397 Article number Cutting range Collet size Note: Note: • The tapping attachment requires auxiliary energy = compressed air (6 +1 bar) for reversing. -0,5 • Adaptor shank, collets, sealing disks and stop block are not part of the delivery, please order separately. • The transfer of compressed air is executed via a special stop block mounted on the...

Open the catalog to page 5

EMUGE Präzisionswerkzeuge GmbH AUSTRIA EMUGE-FRANKEN (Malaysia) SDN BHD MALAYSIA EMUGE-FRANKEN Ferramentas de Precisão Ltda. BRAZIL Av. Dom Pedro II, 288 – 11º Andar · Bairro Jardim - Santo André São Paulo Brasil - CEP 09080-000 Tel. +55-11-4432-2811 · Fax +55-11-4436-3896 EMUGE Corp. MEXICO Handelsstraat 28 · 6851EH Huissen · NETHERLANDS Tel. +31-26-3259020 · Fax +31-26-3255219 CZECH REPUBLIC GREAT BRITAIN Lubovníková 19 · 84107 Bratislava SLOVAK REPUBLIC Tel. +421-2-6453-6635 · Fax +421-2-6453-6636 EMUGE-FRANKEN tehnika d.o.o. SLOVENIA EFT Szerszámok és Technológiák Magyarország Kft....

Open the catalog to page 6