Solid Carbide Twist Drills

Twist Drills Main area of application The twist drill BasicDrill is universally applicable and available in the diameter range from 3.00 to 18.00 mm. The application area of the BasicDrill covers the material groups steel materials, stainless steel materials, cast materials and non-ferrous materials. Its application focus is the steel area. Cutting edge shape and edge preparation Cutting material and coating The concave main cutting edge combined with an optimised edge preparation enables the best cutting behaviour in the steel and cast iron area with excellent tool life. The combination of carbide...

Twist Drills BasicDrill Shank end The shank end has been designed in such a way that the drilling tool can be used with emulsion as well as with minimum quantity lubrication (MQL). Flutes The open shape of the flute facilitates smooth chip evacuation. The EMUGE-FRANKEN performance classes of twist drills The performance classes indicated by stars make it easier to find the right tool for the specific performance requirements and the batch size to be produced. Tools for standard requirements and versatile use are assigned to the category “General Performance”. Tools designed for special materials...

Twist Drills Solid carbide twist drill, 3xD, in Basic geometry for universal application. Product features and benefits: Four margins for better guidance and hole quality. Internal cooling channels and high-performance coating for high process reliability. Use in various materials with steel as the main application area. I nformation about this product is also available on the web Short design Taps Cold-forming taps

Twist Drills BasicDrill Taps Cold-forming taps

Twist Drills Solid carbide twist drill, 5xD, in Basic geometry for universal application. Product features and benefits: Four margins for better guidance and hole quality. Internal cooling channels and high-performance coating for high process reliability. Use in various materials with steel as the main application area. I nformation about this product is also available on the web Long design Taps Cold-forming taps

Twist Drills BasicDrill Taps Cold-forming taps

Twist Drills Application recommendation and cutting data Please note: T he cutting values listed in the respective columns are standard values which have to be adjusted to individual work conditions (material, lubrication, machine etc.). vc = Cutting speed [m/min] f = Feed per revolution [mm/rev.] Stainless steel materials Ferritic, martensitic Austenitic Austenitic-ferritic (Duplex) Austenitic-ferritic heat-resistant (Super Duplex) Cast materials Cast iron with lamellar graphite (GJL) Cast iron with nodular graphite (GJS) Cast iron with vermicular graphite (GJV) Malleable cast iron (GTMW, GTMB)...

Twist Drills

Twist Drills The QR code shown with the tools will take you directly to the respective articles in our web store where you can find comprehensive tool information and cutting data. Registration provides you with additional product data and functions. These include standardised tool data (2D / 3D / characteristics), an order or quotation history and individual watch lists as well as other useful functions.

Twist Drills Regrinding and recoating service Regrinding and recoating form an essential contribution to the economically efficient use of drilling tools. The EMUGE regrinding and recoating service guarantees the restoration of the original geometry and the original coating of the tool. If you are interested, please contact us. Transport The tools can be sent either to EMUGE directly, or picked up by your local EMUGE sales contact. Our special TOOL BOX is available for that if you need it. Regrinding and recoating Before the actual refitting, the tools are checked carefully for their condition....

EMUGE-FRANKEN sales partners, please see www.emuge-franken.com/sales EMUGE-Werk Richard Glimpel GmbH & Co. KG Nürnberger Straße 96-100 91207 Lauf GERMANY F rankenstraße 7/9a 90607 Rückersdorf GERMANY