• Passive PCI-104 based CAN interface designed for compact PCI-104 or PC/104-Plus slots.
• Available with one, two, or four CAN channels using the NXP SJA1000 controller.
• Optional galvanic separation between the CAN controller and PC, as well as between CAN channels.
• Operates over an extended temperature range.
• Compatible with Windows 2000/XP/Vista/7 and Linux, with available drivers.

The CPC-104P is a PCI-104 plug-in card tailored for CAN bus applications, particularly in industrial settings. It is designed for robustness and cost-efficiency, supporting up to four NXP SJA1000 CAN controllers. The card maps the CAN controller into the PC address space, facilitating low-latency access to CAN messages. Software development kits with identical APIs are available for both Windows and Linux, allowing easy adaptation of existing software.

Optional features include galvanic decoupling of the CAN bus and, for dual and quad channel versions, decoupling between CAN channels.

• Bus Interface Configuration: Configured via a rotary switch for the PCI-104 slot.
• Scope of Delivery: Includes the CAN Interface CPC-104P, User Manual, and proCANtool CAN Monitor for Windows 2000/XP/Vista/7.
• Resource Parameters: Base address and interrupt are automatically assigned (Plug & Play).
• Pin Assignment: Connector D-Sub 9, compliant with CiA DS-102.
• Physical Interface Type: ISO 11898 / Transceiver PCA82C251.
• Maximum Voltage on Bus Pins: ±30V relative to bus ground.
• Isolation Voltage: ±1000V DC for galvanic separation between CAN and Host.