Ethernet/CAN‑Interface EtherCAN CIARM9/RMD
2Pages

Ethernet/CAN‑Interface EtherCAN CI ARM9/RMD Special Features • • • • • • EtherCAN CIARM9/RMD Version 3.0 454 MHZ ARM9 CPU (Freescale I.MX287) 128MB SDRAM, 2GB EMCC Flash 10/100MBit Ethernet 2 CAN interfaces Individual galvanic decoupling of both CAN transceivers RS232 interface for configuration USB Host interface SDCard slot Embedded Linux operating system (Kernel 3.5.0) Description EtherCAN CIARM9/RMD acts as a gateway between CAN and Ethernet systems. It is essentially suiteable for applications where processing of messages in the gateway is needed. This includes i.e. visualization of CAN messages by a Web server, complex protocol conversions and others. A Freescale ARM9 CPU (I.MX287) clocked with 454MHz gives enough power for these applications. The device has 128MB SDRAM and 2GB eMMC Flash memory. The CAN interface is realized by the two internal CAN controller of the CPU. Both channel are individual galvanic decoupled from CPU and power supply. A USB 2.0 full speed host interface enables the connection of external peripherals like USB memory sticks or USB WLAN adapters. The SDCard slot allows to handle huge amounts of data when i.e. logging CAN data. The module is intended to be rail mo

Ethernet/CAN-InterfaceTechnical DataLayout and Connection Limiting values Parameter Any (also temporary) stress in excess of the limiting values may cause permanent damage on EtherCAN CI and other connected devices. Exposure to limiting conditions for extended periods may affect the reliability and shorten the life cycle of the device. Nominal Values All values, unless otherwise specified, refer to a supply voltage of 24V and an environmental temperature of 20°C. • User Manual • proCANtool CAN-Monitor for operating systems Windows 2000/XP/Vista/7/8