Catalogs >
Emmegi Group >
Quadra L0 Machining centre

Quadra L0 Machining centre
2Pages

Catalog excerpts

Unloading magazine Machining centre CNC 13-axis machining centre, built for milling, drilling and cutting aluminium profiles and light alloys. Optionally it may be equipped with an end milling module. QUADRA L0 is an automatic magazine with a thrust-feed system for profiles up to 7,500 mm, complete with gripper movement to block the profile. Thanks to the movement of the gripper, the feeder returns to the start position allowing the loader to prepare the next profile at the same time. The milling module, the cutting module and the optional end milling module are located in the central area of the machine. There are 4 electrospindles installed on the CNC 4-axis milling module which allow working on the whole edge of the workpiece, whichever way it faces. The cutting module is equipped with a Ø 350 blade with CNC 3-axis horizontal movement. The optional end milling module operates on two CNC axes by means of a group of cutting units. QUADRA L0 also includes an automatic ejector to transfer the workpiece from the cutting unit to the unloading magazine. The unit is composed of a transverse belts magazine to unload machined workpieces of up to 4000 mm in length (optional 7500 mm). The machining unit is equipped with a sound-proof cabin in the central operating part, which, besides protecting the operator, reduces the environmental noise impact. Milling unit Cutting module The images are only given for illustrative purposes End milling module (optional)

Open the catalog to page 1

Quadra L0 Machining centre Unloading magazine Milling unit Cutting module Numerically controlled, high precision and high speed bar positioning system. The system is complete with a gripper to block the profile with automatic horizontal and vertical position adjustment on two CNC axes. To guarantee that each type of profile is grasped with no manual intervention, the numerical control of the gripper slewing axis is also available, which is otherwise handled manually. The belt loading storage system is used for loading profiles with length of up to 7.5 m. If required, during loading and...

Open the catalog to page 2

Quadra L0 Machining centre 2Pages

Catalog excerpts

All Emmegi Group catalogs and technical brochures

Quadra L0 Machining centre
2Pages