Catalogs >
Emmegi Group >
Emmegi - Satellite XTE

Emmegi - Satellite XTE
16Pages

Catalog excerpts

POWER AND DESIGN 5-axis CNC mobile gantry machining centre, designed to run milling, drilling, threading and cutting processes on large bars in aluminium, PVC, light alloys and steel. The sophisticated and innovative design makes SATELLITE XTE a unique and unmistakable machine: lines, details and materials were studied and designed to offer top performance with a focus on functionality, safety and ergonomics. The mobile part of the machine consists of a gantry equipped with precision motorisation rack. The high-power electrospindle (15 kW in S1) with HSK-63F tool connector allows even...

Open the catalog to page 4

■ The electrospindle The high-power electrospindle (15 kW in S1) with HSK-63F tool connector and water cooling with chiller unit, can also perform the heavy-duty machining typical of the industrial sector, with excellent speed and accurate results. The electrospindle comes with encoder for rigid tapping. The electrospindle moves along the B-axis allowing rotations from 0° to 90°, while along the C-axis it allows m rotations from 0° to 360°. With these rotations, it is possible to machine the profile on 5 faces, without having to reposition it. Single mode 7800 Double mode 7800 Single mode...

Open the catalog to page 6

ALL INSIDE T ool magazine The 24-place tool holder magazine is installed directly on the machine’s trolley; its rear position, in a dedicated area, guarantees maximum protection from machining chips. The turntable magazine enables top reliability, low noise levels and optimised tool change cycles, also thanks to an exchanger arm system. The blade tool, with a maximum 500 mm diameter, is housed in a dedicated magazine, separate from the other tools.

Open the catalog to page 9

Glass protection The new local safety enclosure was designed to combine top functionality, accessibility, soundproofing and light with safety and ergonomic requirements. The operator has broad glazed surfaces to check machining execution and, thanks to the total opening system of the cab in two separate parts, easy access during cleaning and maintenance. The cab interior includes the complete segregation of the work area from the remaining sections of the tool magazine and other accessories supplied on the trolley, ensuring maximum chip collection towards the conveyor belt and, as optional,...

Open the catalog to page 11

CUT WHAT YOU WANT Cut and separation The optional cutting and separation function allows a series of machined profiles to be obtained from one bar and then separated, avoiding the preventive cutting operations of the various short cuts. The wide cut capacity of the blade unit allows separation cuts to be run on large dimensioned profiles. The machine can be equipped with a label printer, to optimise the management of profiles in subsequent phases.

Open the catalog to page 12

FAST CLAMPS Servocontrolled clamps The clamp unit is able to ensure correct, safe and quick locking of profiles in large dimensions, and does not require tools for its geometric adjustments. Each unit slides via linear guides on the machine’s surface. The servocontrolled clamps, each with their own motor, can independently position themselves on the work field. In dynamic double position, the CNC manages the handling of the clamps and mobile gantry in the two distinct work fields at the same time; this allows significant increases in productivity. The use of absolute reference axes enables...

Open the catalog to page 13

AXIS TRAVEL X AXIS (longitudinal) Y AXIS (cross) Z AXIS (vertical) B AXIS (electrospindle rotation on the horizontal axis) C AXIS (electrospindle rotation on the vertical axis) POSITIONING SPEED X AXIS (m/min) Y AXIS (m/min) Z AXIS (m/min) B AXIS (°/min) C AXIS (°/min) ELECTROSPINDLE Maximum power in S1 Maximum speed Maximum torque Tool attachment cone Encoder on electrospindle for rigid tapping Water cooling with chiller unit WORK UNIT Portal structure Electrospindle piloted on 5 axes with possibility of simultaneous interpolation Tool oil lubrication system with minimal pressurised...

Open the catalog to page 14

The product data, descriptions and illustrations appearing in this catalogue are shown for advertising purposes; they are given as examples only, and shall not be binding on the manufacturer or the vendor under any circumstances. For marketing reasons, products may be reproduced or portrayed with non-standard configurations, colours or optional extras, in older versions or with special customisations or different technical characteristics, possibly for supervening manufacturing reasons. The manufacturer and the vendor reserve the right to make any modification whatsoever to the products....

Open the catalog to page 16

Emmegi - Satellite XTE 16Pages

Catalog excerpts

All Emmegi Group catalogs and technical brochures

Emmegi - Satellite XTE
16Pages