Emmegi - Phantomatic
20Pages

{{requestButtons}}

Catalog excerpts

Emmegi - Phantomatic - 1

PHANTOMATIC PHANTOMATIC M3 PHANTOMATIC M4L PHANTOMATIC T3A PHANTOMATIC T3S PHANTOMATIC T3STAR PHANTOMATIC X4 PHANTOMATIC X6

Open the catalog to page 1
Emmegi - Phantomatic - 3

SELECT YOUR PARTNER

Open the catalog to page 3
Emmegi - Phantomatic - 4

-IANTOMATIC T3A ANTOMATIC T3S TOMATIC T3STAR HANTOMATIC X4 m Phantomatic: each one has its own One range, many solutions. Phantomatic is the range of CNC machining centres for aluminium, light alloy, PVC and steel profiles with up to 3 mm thickness (according to the models). It offers many options and —configurations to meet every specific requirement. Available in 3+1 or 4 CNC axes version with X-axis stroke of 3000 mm or in 3, 3+1 or 4 CNC axes version with X-axis stroke of 4300 mm. Finally a 4-axis version is also available with a 7700 mm X-axis stroke.

Open the catalog to page 4
Emmegi - Phantomatic - 7

TAILORED CHOICE The winning combinations Phantomatic offers various constructive solutions to adapt to the various operational requirements. In the M4 L, X4 and X6 models, thanks to the 4th axis CNC, the electrospindle rotates from 0° to 180° continuously to operate on the whole contour of the workpiece, guaranteeing the possibility of working at all intermediate degrees including tenths of a degree. The T3 S and T3 Star models have a rotary work table, which allows machining the profiles with angles ranging between -90° and +90°, keeping the spindle always in a vertical position, thereby...

Open the catalog to page 7
Emmegi - Phantomatic - 9

ACTION POWER Power and agility Phantomatic can be equipped with electrospindles with high torque power ranging from 4 to 7.5 kW in S1 in order to carry out heavy-duty processing. The double tank lubrication system (excluding M3 and M4 L) allows using both a minimal oil quantity and oil emulsion micro-mist. Therefore, you can choose the best suited system according to the type of material and processing. As an option, the spindle can be set for rigid tapping and FlowDrill® (T and X versions).

Open the catalog to page 9
Emmegi - Phantomatic - 11

REFERENCES AND CLAMPING Intelligent clamps Phantomatic always opts for the best grip. The position of every clamp unit is calculated by a software according to the operations to be carried out on the profile so as not to interfere with the processing clearance. The units are moved quickly and without any margin of error. The X6 HP version is an exception since it has two additional axes that position the clamps separately from the trolley while the machine is running. The M3, M4 L, T3 A, X4 and X6 models have a translation movement in Y of the clamp unit, which allows processing the sides...

Open the catalog to page 11
Emmegi - Phantomatic - 12

TOOL MAGAZINL" Versatile tool storage unit The tool magazine for every Phantomatic in the T series has 4 or 8 slots and features an exclusive round design —that reduces the overall dimensions and increases tool change speed. The covering protects the tool magazine from swarf and accidental knocks. Besides the standard tools, the tool magazine can also be equipped with 2 angular units and a milling disc for machining all the sides of the profile. The Phantomatic X4 and X6 8-slot tool magazine is located on the trolley solidly connected to the electrospindle. This solution allows for a...

Open the catalog to page 12
Emmegi - Phantomatic - 13

TOTAL CONTROL Interface under control The Phantomatic range operator interface is equipped with a 15” suspended monitor that can be oriented according to requirements. The touch-screen display and a user-friendly software make the interface particularly simple and intuitive. The control is integrated with the mouse, keyboard and front USB port for external memory connection. The CNC can also be set to be equipped with a barcode reader and an MG PILOT pushbutton panel that optimises the management of manual functions.

Open the catalog to page 13
Emmegi - Phantomatic - 14

DOUBLE AREA Maximum productivity Phantomatic X6 is available in 3 versions: X6 M, X6, X6 HP. All versions can operate in single-piece and multipiece mode on a single machining area of up to 7.7 m length. The X6 and X6 HP models also allow machining in pendular mode on two independent machining areas. The HP version allows operating in dynamic pendular mode thanks to two independent clamp positioners, controlled by two additional axes, which position the clamps while the machine is running. The positioners are equipped with a workpiece reference end stop, which allows positioning several...

Open the catalog to page 14
Emmegi - Phantomatic - 15

Single Piece Mode Swinging Mode Multi-piece mode (max 2 workpieces per X6 M and X6 version) Dynamic Swinging Mode

Open the catalog to page 15
Emmegi - Phantomatic - 16

TAKE MEASURE Measure your profile Phantomatic X4 and X6 are equipped with a profile length measuring system. A moving plate located on the right hand side of the trolley allows the machine to electronically verify the true length of the profile to be machined. Once the workpiece has been adjusted with reference to the left and right end stops, the system electronically imports the data and the CNC automatically corrects any errors due to manual insertions.

Open the catalog to page 16
Emmegi - Phantomatic - 17

Close at hand MG Pilot is the pushbutton panel of the Phantomatic range, equipped with LCD graphic display that allows to have all the machine functions close at hand. The display shows all the manual operations that are validated through the pushbutton panel; this way, the operator does not have to place himself at the CNC on board the machine. MG Pilot is particularly useful in Pendular mode.

Open the catalog to page 17
Emmegi - Phantomatic - 18

Y-AXIS (transversal) 1 side/3 sides (M3 only); 1 side/5 sides Z-AXIS (vertical) 1 side/3 sides (M3 only); 1 side/5 sides A AXIS (automatic rotation) POSITIONING SPEED X AXIS (longitudinal) Y AXIS (transversal) Z AXIS (vertical) A AXIS (automatic rotation) ELECTROSPINDLE FEATURES Maximum power in S1 Maximum speed Maximum torque Tool attachment cone Electrospindle set for Flow-Drill® TAPPING CAPACITY (with tap, on aluminium through hole) Encoder on electrospindle for rigid tapping With compensator Rigid tapping TOOL STORAGE UNIT Automatic tool change Number of tools in the storage unit...

Open the catalog to page 18
Emmegi - Phantomatic - 20

The product data, descriptions and illustrations appearing in this catalogue are shown for advertising purposes; they are given as examples only, and shall not be binding on the manufacturer or the vendor under any circumstances. For marketing reasons, products may be reproduced or portrayed with non-standard configurations, colours or optional extras, in older versions or with special customisations or different technical characteristics, possibly for supervening manufacturing reasons. The manufacturer and the vendor reserve the right to make any modification whatsoever to the products....

Open the catalog to page 20

All Emmegi Group catalogs and technical brochures

  1. Vegamill H&B

    2 Pages

  2. Compound Cut

    2 Pages

  3. Precision RS

    2 Pages

  4. V-Cut System

    2 Pages