Emmegi - Comet S
16Pages

{{requestButtons}}

Catalog excerpts

Emmegi - Comet S - 1

COMET S COMET S4 COMET S4I COMET S6HP COMET S6I

Open the catalog to page 1
Emmegi - Comet S - 4

Comet’s R Galaxy Guaranteed safe, ergonomic and easy to use. These are the distinctive features of the Comet S family: 4-axis CNC machining centres designed for working bars or parts in aluminium, PVC, light alloys in general and steel. In the HP version (Comet S6HP), the machine has two additional axes for positioning clamps and reference stops in concurrent time during double operation mode. In the I version, the servocontrolled clamps, each with its own motor, independently position themselves in the working field faster compared with the standard version. In Comet S, the 8.5 kW...

Open the catalog to page 4
Emmegi - Comet S - 5

TOUCH THE FUTURE T ouchscreen interface The command and control unit, with suspended interface, allows the operator to view the screen from any position, thanks to the possibility of rotating the monitor on its vertical axis. The operator interface has a 24” touchscreen display in 16:9 format, portrait mode, with all the USB connections necessary to interface with a remote PC and NC. An operator panel and mouse, in addition to the set up for connecting a barcode reader, remote operator panel and front USB port, complete the equipment.

Open the catalog to page 5
Emmegi - Comet S - 7

" Electrospindle The 8.5 kW electrospindle in S1 with high torque also enables performing the heavy machining typical of the industrial sector. A 10.5 kW electrospindle with encoder for rigid tapping is available as optional. Electrospindle rotation along A from -120° —to +120° axis allows working on 3 sides of the profile, with no need for repositioning. Normally used for machining extruded aluminium profiles, it also enables machining steel profiles thanks to the twin tank lubrication system: one with minimal oil diffusion, and the other with oil emulsion spray. Single mode Asymmetrical...

Open the catalog to page 7
Emmegi - Comet S - 9

Glass protection Design and function come together in pursuit of the operator’s health and safety. The care and attention given to researching the materials confirm this. Safe, perfect, resistant, long-lasting. These are the advantages of choosing glass for protecting the new Comet machining centres. Machine glass cuts operate to flag machine statuses, thanks to a light colour interface. The whole visor slides downwards, thus making it easier to load the pieces; additionally, the ends feature an aluminium guard that acts as a support plane if needed.

Open the catalog to page 9
Emmegi - Comet S - 10

ALWAYS NEAR T ool magazine The tool holder magazine is integrated in the X-axis, placed in the lower section and in a recessed position with respect to the electrospindle, and allows reducing the time for the tool change operation. Particularly useful for machining the head and end of the extruded profile, it enables avoiding the stroke to reach the magazine. The magazine can contain up to 10 tool holders with respective tools, that can be configured at the operator’s discretion. It can hold a 250 mm blade, for machining on the 5 sides of the profile. Each position of the tool holder is...

Open the catalog to page 10
Emmegi - Comet S - 11

Foldaway tunnel Integrated with the machine’s aesthetics and design, thanks to the perforated sheet metal for transparency and lightness, the tunnel opens and closes as needed. As its length can be reduced when not in use, it helps save space at the workshop. The outlet for the chip conveyor belt and its engine are built into the lower section, in view of an aesthetic and functional design. GHOST TUNNEL

Open the catalog to page 11
Emmegi - Comet S - 12

WHAT YOU WANT Automatic clamps In various Comet S models, profile clamping is ensured by pneumatic clamps with automatic positioning. The clamps table moves along the Y-axis to facilitate profile loading and increase the working field. Positioning heights are always managed by NC, which means significantly reduced handling times, precise positioning, and zero errors due to manual intervention. In the Comet S4 model, the carriage hooks each clamps unit and moves it to the position established by control. HP version In the Comet S6HP model, the machine has two additional H and P axes with...

Open the catalog to page 12
Emmegi - Comet S - 13

I version In the I version (Comet S4I and S6I), the servocontrolled clamps, each with its own motor, can independently position themselves in the working field. The CNC simultaneously manages the handling of the clamps and the head of the electrospindle in the two different working fields in double operation. The clamps in dynamic double operation independently position themselves in concurrent time with respect to the spindle machining processes in the opposite working field. This enables significant increases in productivity, which are appreciable in the cut and separate function. The use...

Open the catalog to page 13
Emmegi - Comet S - 14

AXIS TRAVEL X AXIS Y AXIS Z AXIS A AXIS POSITIONING SPEED X AXIS Y AXIS Z AXIS A AXIS ELECTROSPINDLE Max. power rating in S1 Max. power rating in S6 (60%) Max. speed Toolholder ta Automatic toolholder engagement Cooling through heat exchanger Electrospindle controlled on 4 axes with possibility of simultaneous interpolation HIGH PERFORMANCES ELECTROSPINDLE (OPTIONAL) Max. power rating in S Max. power rating in S6 (60%) Electrospindle with encoder for rigid tapping MACHINABLE FACES With direct tool (top face, side faces, front faces) With blade tool (top face, side faces and front faces)...

Open the catalog to page 14
Emmegi - Comet S - 16

The product data, descriptions and illustrations appearing in this catalogue are shown for advertising purposes; they are given as examples only, and shall not be binding on the manufacturer or the vendor under any circumstances. For marketing reasons, products may be reproduced or portrayed with non-standard configurations, colours or optional extras, in older versions or with special customisations or different technical characteristics, possibly for supervening manufacturing reasons. The manufacturer and the vendor reserve the right to make any modification whatsoever to the products....

Open the catalog to page 16

All Emmegi Group catalogs and technical brochures

  1. Vegamill H&B

    2 Pages

  2. Compound Cut

    2 Pages

  3. Precision RS

    2 Pages

  4. V-Cut System

    2 Pages