Catalogs >
Emmegi Group >
Copia 384 S Manual copy router

Copia 384 S Manual copy router
2Pages

Catalog excerpts

Control joystick Control with inverter Manual copy router Single-head manual-control copy router with pneumatic locking system and head traversing movement controlled by an indirect lever. Ability to work steel up to 2 mm and stainless steel (optional) up to 2 mm. Equipped with a rotating surface clamp table system, the machine works 4 profile faces without releasing the clamp or carrying out machining passing, performing a rotation of 270° to 90° sectors Four pneumatic stops ensure locking. Pneumatic protection of the work area. The rotation device makes it possible to increase the processing speed and the level of precision, use shorter tools, eliminate passing machining and reduce vibrations and noise. Stops and roller conveyors The pictures are provided by way of illustration only

Open the catalog to page 1

Copia 384 S Manual copy router Workpiece rotation Control joystick Stops and roller conveyors Control with inverter Via the release control on the console, the slewing ring with rotary movement can be moved manually and blocked in 4 preset positions by pneumatic stops, for processing to be performed on the other sides of the profile. The lever allows the vertical movement of the milling unit. A motor starter button is found on the joystick. The electrospindle has a tool holder with an ISO 30 quick coupling; there are 4 housings on the sides of the machine for 3 tool holders. The machine has...

Open the catalog to page 2

Copia 384 S Manual copy router 2Pages

Catalog excerpts

All Emmegi Group catalogs and technical brochures

Copia 384 S Manual copy router
2Pages