Catalogs >
Emmegi Group >
Comet R6 HP 5-axis machining centre

Comet R6 HP 5-axis machining centre
2Pages

Catalog excerpts

5-axis CNC machining centre used for the working of bars of aluminium, PVC, light alloys in general and steel pieces. It is provided with two operating modes: a single work area for bars up to 7 m length or two independent work areas in swing mode. The machine in HP version is equipped with 2 additional axes for positioning of vices and reference stops, that allow positioning the vices while the machine is working in swing mode. The 4th and 5th axis allow the electric spindle to continuously rotate to NC from -15° to 90° on horizontal axis and from 0° to 720° on continuous vertical axis, to perform the work on the upper side and on all the lateral sides of the profile. It is provided with a 12-place tools magazine, on the X axis gantry, able to host also one milling disc. It also has a mobile work surface that facilitates the piece loading/unloading operation and significantly increases the workable section. Operator interface Tool Storage The images are only given for illustrative purposes Double mode

Open the catalog to page 1

Comet R6 HP 5-axis CNC machining centre Vice positioner Operator interface Tool Storage Double mode Vice unit positioning is performed by two numerically controlled axes, parallel to X axis, with onboard reference stop. This solution allows positioning stops all along the machine to work in multipiece mode with one piece for each pair of vices. Furthermore, vice positioning is provided independently from the operative status of X axis. In this way dynamic double operation mode is simultaneously possible with vice positioning during masked time. 8.5 kW S1 high torque electrospindle also...

Open the catalog to page 2

Comet R6 HP 5-axis machining centre 2Pages

Catalog excerpts

All Emmegi Group catalogs and technical brochures

Comet R6 HP 5-axis machining centre
2Pages