Overview

This document provides technical specifications, performance data, and dimensional details for Emmecom s.r.l.'s side channel compressors and vacuum pumps, specifically models SC501MG1.5T, SC501MG2.2T, and SC501MG1.5M. These devices are designed for continuous operation in air moving applications, functioning both as compressors and vacuum pumps.

Technical Specifications and Performance

The compressors operate on the lateral channel principle, constructed from die-cast aluminum for robustness and ease of handling. They require no lubrication due to the absence of contact between static and rotating parts, contributing to low maintenance and high reliability. Special silencers ensure a high level of noise reduction.

Performance curves are provided for both suction capacity (m³/h) versus pressure (mbar rel.) and compression capacity versus inlet vacuum (mbar rel.), measured at standard conditions: inlet air temperature of 15°C, air density of 1.23 kg/m³, and atmospheric pressure of 1.013 mbar. The tolerance on these curves is ±10%, and data may be subject to change without notice.

Electrical and Acoustic Parameters

Design and Construction

The compressors are built with a full die-cast aluminum body ensuring maximum sturdiness and ease of handling. The rotating parts are dynamically balanced and mounted directly on the motor shaft to eliminate vibrations. The design supports continuous operation without lubrication requirements.

Dimensional Data

Detailed dimensional drawings are provided with measurements in millimeters for all critical mounting and connection points. Key dimensions include:

• Overall length and width approximately 334 mm by 337 mm
• Connection thread: G2”
• Mounting holes: Multiple M8, M16, M25 threaded holes distributed at 0°, 120°, and 240° angles
• Flange diameter: Ø200 mm

The dimensional data supports proper installation and integration into customer systems.

Critical Notes and Recommendations

• Performance data is based on standard air conditions (15°C, 1.23 kg/m³ density, 1.013 mbar pressure) with ±10% tolerance.
• Data and specifications are subject to change without prior notice.
• No lubrication is required, reducing maintenance complexity.
• Noise levels vary with frequency and model, ranging from 64 to 70 dB(A).
• Electrical supply requirements differ by model and frequency; ensure compatibility with local power standards.

Contact Information

Manufacturer: Emmecom s.r.l.
Address: Via P. Nenni, 70, 20093 Cologno Monzese (MI), Italy
Phone: +39 02 25 33 300
Fax: +39 02 27 307 908
Website: www.emmecomsrl.com
Email: [email protected]