Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. EMLID
  3. REACH M2

REACH M2

REACH M2
1 / 2 PagesView full catalog

REACH M2

Product catalog summary
Overview: The REACH M2 is an RTK GNSS module designed for UAV mapping, offering centimeter-level accuracy in both RTK and PPK modes. It is optimized for precise mapping with fewer ground control points (GCPs).
Key Features:
  • Multi-band capability with a baseline of up to 100 km in PPK.
  • Compatible with the Emlid Flow app for iOS and Android.
Technical Specifications:
  • Mechanical: Dimensions are 56.4x45.3x14.6 mm, and it weighs 20 g. It operates within a temperature range of -20 °C to +65 °C.
  • Electrical: Input voltage is 4.75–5.5 V via USB and JST-GH connectors, with an antenna DC bias of 3.3 V and an average current consumption of 200 mA at 5V.
  • Connectivity: Includes USB, UART, and Event interfaces, Wi-Fi 802.11 b/g/n, and Bluetooth 4.0/2.1 EDR.
  • Data: Position output formats include NMEA, LLH/XYZ (RMC, GGA, GSA, GSV), with correction input via RTCM2 and RTCM3. It has 16 GB of internal storage and supports RINEX2.X and RINEX3.X logs.
  • Positioning: Static accuracy is H: 4 mm + 0.5 ppm, V: 8 mm + 1 ppm; Kinematic accuracy is H: 7 mm + 1 ppm, V: 14 mm + 1 ppm.
  • GNSS: Supports GPS/QZSS L1C/A, L2C, GLONASS L1OF, L2OF, BeiDou B1I, B2I, Galileo E1-B/C, E5b signals, with an update rate of 20 Hz for GPS and 5 Hz for GNSS, and 184 tracking channels.
Emlid Software and Services:
  • Emlid Flow: A mobile app for land surveyors available on iOS and Android.
  • Emlid Studio: Free software to simplify post-processing workflows.
  • Emlid NTRIP Caster: Streams corrections to RTK GNSS receivers over the internet.
See more

Catalog excerpts

REACH M2-1

RTK GNSS module for UAV mapping Positioning with centimeter accuracy in RTK and PPK. For precise UAV mapping with less GCPs. • Multi-band • Baseline up to 100 km in PPK • Comes with the Emlid Flow app for iOS and Andr

 Open the catalog to page 1
REACH M2-2

REACH M2 Technical specifications MECHANICAL Operating temperature DATA ELECTRICAL Position output Input voltage on USB and JST-GH connectors Average current consumption at 5V Correction input Internal storage GNSS Signals Update rate Tracking channels CONNECTIVITY Interfaces EMLID SOFTWARE AND SERVICES Emlid Studio Emlid Flow Emlid NTRIP Caster Easy-to-use free software to simplify Mobile app for land surveyors. Stream corrections to your RTK your post-processing workflow. GNSS receivers over the internet

 Open the catalog to page 2

All EMLID catalogs and technical brochures

  1. REACH RS2+
    REACH RS2+

    2  Pages

  2. REACH RX
    REACH RX

    2  Pages

  3. REACH RS3
    REACH RS3

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.