60W Power Supply Module

1 / 2 PagesView full catalog

60W Power Supply Module

Product catalog summary

General Specifications:

Universal Input Voltage: 100-240 VAC (-15% to +10%) at 50/60 Hz.
Adjustable Output Voltage: 24VDC (±10%).
Output Current: 2.5 A / 60 W at 24 VDC.
Active Output LED Indicator.
Connectivity: Can be connected to other IPERTU modules over IPERTU BUS without cable connection, must be connected to the left of the modules connected to the IPERTU BUS.

Electrical Specifications:

Input:
- Voltage Range: 100-240 VAC (-15% to +10%) at 50/60 Hz.
- Efficiency: Greater than 84%.
- Inrush Current: Maximum 33A at 230 VAC.
- Leakage Current: Maximum 2.5mA.
Output:
- Rated Power: 60W, 2.5 A at 24 VDC.
- Adjustable Voltage Range: 24 VDC (±10%), adjustable with Trimpot.
- Ripple: Maximum 300 mVpp.
- Load Regulation: Less than 1.5%.
- Line Regulation: Less than 1.5%.
- Start-Up Time: 1200ms at 230VAC.
- Hold-Up Time: 100ms at 230VAC.
Protections:
- Overload Protection: 140%.
- Short Circuit Protection: Auto-recovery after error disappears.
- Thermal Protection: Output voltage reduces when ambient temperature exceeds 55°C, depending on temperature and load current.

Operation / Storage Environment:

Operating Temperature: -20°C to +50°C.
Storage Temperature: -30°C to +75°C.
Protection Class: IP20.
Pollution Degree: 2.

Isolation:

3000 VAC isolation between Input and Output.
1500 VAC isolation between Input and Earth.
500 VAC isolation between Output and Earth.

Physical Specifications:

Dimensions: 50 x 100 x 70 mm.
Weight: 230 grams.

Indicators:

Output LED is ON when the output is within rated limits.

Installation & Wiring:

Ensure all wiring is checked before energizing the device.
To prevent electromagnetic interference, ensure proper grounding.
Connect the ground terminal in the power input connector to the overall system ground.
Do not touch any terminals after energizing the device; de-energize before making any connections.

Catalog excerpts

Electrical Specifications General Specifications : * Universal Input Voltage 100-240 VAC (-15% .. +10%) 50/60 Hz * 24VDC (±%10) Adjustable Output Voltage * 2,5 A / 60 W @ 24 VDC * Active Output Led indicator * Can be connected to other IPERTU modules over IPERTU BUS without cable connection (must be connected to left of the modules connected to the IPERTU BUS)

Open the catalog to page 1

Installation & Wiring * Please check all wiring prior to energizing device. In order to prevent electromagnetic interference, be sure the grounding made corrected. Connect ground terminal in the power input connector to the overall system ground. Don’t touch any terminals after energizing the device, in case of need to touch any terminal, de-energize the device before connection.

Open the catalog to page 2

All EMKO Elektronik catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list