Easy to clean for good hygiene! INGENIOUS LOCKING TECHNOLOGY for clean and hygienic working areas

About EMKA The EMKA Group is world market leader for locks and latches, hinges and seals used in switch and control cabinets. In the areas HVACR, transport and hygienics, EMKA is one of the leading manufacturers of locking technology. Currently, the overall range comprises more than 30,000 catalog and special articles, which are developed, manufactured, refined and assembled at ten production sites in Germany, France, Great Britain, Spain, Bosnia-Herzegovina, Serbia, China and India. With 2,100 employees EMKA serves over 34,000 customers in 52 countries worldwide. Since a company takeover in...

Hygiene products made by EMKA Smooth surfaces without edges, undercuts and dead spaces - this is the main requirement of food and pharmaceutical producers for reliable locking technology with guaranteed hygiene. In addition, the products used should be able to withstand the jet of a high-pressure cleaner to enable efficient "Cleaning in Place". The prerequisite for this are appropriately processed stainless steel components, which EMKA develops in its own technology centre and subsequently manufactures itself. In addition to the stainless steel locks and handles, EMKA offers the matching hinges...

Clean locking! Depending on the area of application, different requirements and standards apply to hygienic locks. In some cases, only locks that are certified in accordance with DGUV or EHEDG may be used. In other working areas these certificates are not required. These certificates are particularly relevant for companies in the food and pharmaceutical industries, as these sectors have particularly high hygiene requirements. However, a clean and germ-free working environment is also becoming increasingly important outside these industries. Therefore EMKA also offers locking systems for industries...

Stainless steel quarter turn for hygienic areas Certified according to DGUV and EHEDG Locks and handles Quarter turn for hygienic areas for food and medical sector Stainless steel quarter turn for hygienic areas with flat seal flush on the outside Electronic solutions Sealing profiles Quarter turn for hygienic areas AISI 303 or 316L, with seal AISI 303 - for food sector AISI 316L - for food and medical sector Square 8 AISI 303 Note: The quarter turns for hygienic areas meet the hygiene requirement acc. to DIN EN 1672-2, DIN EN 14159 and EHEDG Dok.8. The seals meet the requirements of the FDA...

Stainless steel quarter turn for hygienic areas PROGRAM 1000 Sealing profiles Quarter turn for hygienic areas AISI 303 or 316L, with seal AISI 316L 1000-U838-PF © EMKA Beschlagteile GmbH & Co. KG • 2020 • www.emka.com Further parts see page ‒ Stainless steel cam with catch (GH = 18) HYG-5 ‒ Hygiene key HYG-6 ‒ eCam HYG-15 Electronic solutions Note: The quarter turns for hygienic areas meet the hygiene requirement acc. to DIN EN 1672-2 and DIN

Stainless steel compression latch for hygienic areas Certified according to DGUV and EHEDG Locks and handles Compression latch for hygienic areas for food and medical sector Stainless steel compression latch for hygienic areas with flat seal flush on the outside Closed condition The second 90° of rotation of the insert draws the cam toward the door 6 mm axially. Sealing profiles Open condition By turning the insert by 90° the cam is turned. Compressed condition Open: Reversed motion Electronic solutions Compression latch for hygienic areas AISI 303 or 316L; with seal AISI 303 - for food sector...

Stainless steel compression latch for hygienic areas PROGRAM 1000 The compression latch for hygienic areas meets the hygiene requirement acc. to DIN EN 1672-2, DIN EN 14159. This item is completely IP69K, not only from outside to inside (common standard), but also within the application. Tamper and vibration proof The compression latch is designed to be vibration-proof as such. Depending on the installation location and operational conditions, specific checks are necessary and/or supplementary measures of fastening required. Open condition By turning the insert by 90° the cam is turned. 1000-U861...

Stainless steel cam with catch Stainless steel cam without catch Version 2 Cam with rod control (flank cam) Cam without catch on request Sealing profiles This catalogue page does not show all available cams. Other versions such as: ‒ Cams without catch ‒ Cams with other H and L dimension ‒ Cams with recess in the opposite direction ‒ etc. please ask. Cam with catch material of choice H dimensions for GH © EMKA Beschlagteile GmbH & Co. KG • 2020 • www.emka.com Further parts see page ‒ Quarter turn for hyigenic areas HYG-1 HYG-2 ‒ Compression latch for hygienic a

Key handle polyamide black 1004-62 1004-53 © EMKA Beschlagteile GmbH & Co. KG • 2020 • www.emka.com Further parts see page ‒ Quarter turn for hyigenic areas HYG-1 HYG-2 ‒ Compression latch for hygienic areas HYG3 HYG-4 Electronic solutions Sealing profiles Further parts see page ‒ Quarter turn for hyigenic areas HYG-1 HYG-2 ‒ Compression latch for hygienic areas

Stainless steel bow-type handle for hygienic areas PROGRAM 1095 Locks and handles Sealing profiles Stainless steel bow-type handle for hygienic areas with flat seal flush on the outside Electronic solutions Stainless steel bow-type handle AISI 316L for hygienic areas, with seal A © EMKA Beschlagteile GmbH & Co. KG • 2020 • www.emka.

Stainless steel bow-type handle Electronic solutions Sealing profiles Bow-type handle AISI A © EMKA Beschlagteile GmbH & Co. KG • 2020 • www.emka.com

Hinges with the right rotation Hinges play a decisive role in hygiene-intensive work areas. In order to implement a hygienic design, it is particularly important that the hinge is mounted inside the door, in the non-visible area. This is an important prerequisite for achieving a hygiene-conform working environment. To achieve a hygienic working environment, the door must be guided straight onto the frame and rest without friction. This prevents abrasion of the seal, which would be caused by friction at high seal compression. Hinges from EMKA with exact geometry and matching pivot point contribute...