TANK LEVEL GAUGE - RTS The Tank Level Gauge - RTS operates based on the conductance of the measured liquids. The electrodes are placed at each quarter lenqth of the probe. The LED indicator (ultra-briqht LED) siqnals the level of the liquid. The red LED indicates that the liquid level has reached less than 25%. As an additional option, an external device (such as a buzzer or siren) can be controlled by a relay output pin on the indicator unit. The indicator is able to communicate with the other displays (Remote Indicators) via the 1 -wire datalink. REAR PANEL CONNECTORS Power supply Power consumption* Alarm relay output Detection method Level indication Detectable substances Probe fitting Electrodes Material Operating temperature - indicator Probe cable Power supply voltage, max.6A 5 x LEDs (ultra bright) Water, Fire-smothering foam, Current conductive liquids P67 Probe; IP67 Indicator (front panel) 72x36x68 mm or 77.5x41.5x68 with Aluminium Bezel (LxHxW) 96x48x73 mm or 103x55x73 with Aluminium Bezel (LxHxW)

TANK LEVEL GAUGE - RTS ORDERING INFORMATION Use the RED character from the chart below to construct a basic product code. SENSOR CABLE MASTER UNIT LARGE LIGHT ALARM RELAY SLAVE UNIT-REMOTE INDICATOR AUTO-FILL FUNCTION AL BEZEL WITH HYSTERESIS ALXS Silver close, 75% valve open ALXB... Black TANK LEVEL GAUGE- RTS AU DIMENSIONS TANK LEVEL GAUGE RTS-AU REAR PANEL CONNECTORS