TANK LEVEL GAUGES - TLG RTS AU

Product catalog summary

Overview: The Tank Level Gauge - RTS is designed to measure liquid levels using conductance. It features electrodes placed at each quarter length of the probe and uses ultra-bright LEDs for level indication. A red LED signals when the liquid level is below 25%. An optional relay output can control external devices like buzzers or sirens. The gauge can communicate with remote indicators via a 1-wire datalink.

Specifications:

Power Supply: 10 V to 30 V DC
Power Consumption: Approximately 3 W (with no outputs active)
Alarm Relay Output: Max 6A at power supply voltage
Detection Method: Conductive
Level Indication: 5 ultra-bright LEDs
Detectable Substances: Water, fire-smothering foam, and other conductive liquids
Probe Fitting: G 5/4” with O-ring (NBR)
Electrodes Material: 1.4305 stainless steel
Enclosure Protection: IP67 for both probe and indicator front panel
Operating Temperature: -45 °C to +85 °C (-49 °F to +185 °F)
Indicator Dimensions: 72x36x68 mm or 77.5x41.5x68 mm with Aluminium Bezel
RTS-AU Dimensions: 96x48x73 mm or 103x55x73 mm with Aluminium Bezel
Probe Cable: 5 x 0.25 + connector M12
Weight: Probe (1 m): 0.8 kg, Indicator: 0.1 kg

Ordering Information: The product code is constructed using specific characters from a chart. Key components include:

Alarm Relay Output: R for relay output (max 6A when tank level < 1/4)
Auto-Fill Function: H100/75 indicates 100% valve close, 75% valve open
Probe Length: 1200 mm
Large Light Driver: LLD5 for level indication at 0, 1/4, 1/2, 3/4, 1
Sensor Cable Length: Standard lengths of 5 or 10 meters
Detectable Media: W for water, F for foam
Slave Unit - Remote Indicator: RI04
Aluminium Bezel: ALXS for Silver Eloxated, ALXB for Black Eloxated

Catalog excerpts

TANK LEVEL GAUGE - RTS The Tank Level Gauge - RTS operates based on the conductance of the measured liquids. The electrodes are placed at each quarter lenqth of the probe. The LED indicator (ultra-briqht LED) siqnals the level of the liquid. The red LED indicates that the liquid level has reached less than 25%. As an additional option, an external device (such as a buzzer or siren) can be controlled by a relay output pin on the indicator unit. The indicator is able to communicate with the other displays (Remote Indicators) via the 1 -wire datalink. REAR PANEL CONNECTORS Power supply Power consumption* Alarm relay output Detection method Level indication Detectable substances Probe fitting Electrodes Material Operating temperature - indicator Probe cable Power supply voltage, max.6A 5 x LEDs (ultra bright) Water, Fire-smothering foam, Current conductive liquids P67 Probe; IP67 Indicator (front panel) 72x36x68 mm or 77.5x41.5x68 with Aluminium Bezel (LxHxW) 96x48x73 mm or 103x55x73 with Aluminium Bezel (LxHxW)

Open the catalog to page 1

TANK LEVEL GAUGE - RTS ORDERING INFORMATION Use the RED character from the chart below to construct a basic product code. SENSOR CABLE MASTER UNIT LARGE LIGHT ALARM RELAY SLAVE UNIT-REMOTE INDICATOR AUTO-FILL FUNCTION AL BEZEL WITH HYSTERESIS ALXS Silver close, 75% valve open ALXB... Black TANK LEVEL GAUGE- RTS AU DIMENSIONS TANK LEVEL GAUGE RTS-AU REAR PANEL CONNECTORS

Open the catalog to page 2

TANK LEVEL GAUGES - TLG RTS AU

TANK LEVEL GAUGES - TLG RTS AU

Catalog excerpts

All EMITTER catalogs and technical brochures

Archived catalogs