DIGITAL PRESSURE INDICATOR - DPI

Product catalog summary

Overview: The Digital Pressure Indicator (DPI) is designed to measure and display pressure in various ranges, including 0 to 20 bars, 0 to 60 bars, and as a vacuum indicator from -1 to 20 bars. It features a stainless steel pressure transducer and a 2 ½ digit super bright LED display.

Key Features:

Optional relay outputs programmable for specific pressure limits.
Communication capability with remote pressure indicators via a one-wire datalink.

Dimensions and Specifications:

Power Supply: 10 V to 30 V DC, with a power consumption of approximately 3 W.
Alarm Relay Output: Maximum 6A at power supply voltage.
Pressure Reading Range: 0 to 19.9 bars, 0 to 60 bars, -1.0 to 19.9 bars.
Reading Accuracy: 0.1 bar for 20 bars and vacuum indicator; 1 bar for 60 bars indicator.
Display: 2 ½ digit LED, super bright.
Transducer Connection: M12x1 electrical connection, G 1/4” pressure port fitting.
Housing: Stainless steel 316L, with IP67 protection for both transducer and indicator front panel.
Operating Temperature: -45 °C to +85 °C.
Dimensions: 72x36x68 mm or 77.5x41.5x68 mm with Aluminium Bezel.
Weight: 0.1 kg for both transducer and indicator.

Ordering Information: Product codes are constructed using specific characters for pressure range, alarm relay output, bezel type, and sensor cable length. Examples include:

Pressure Measuring Range: 20B (0 to 19.9 bar), 60B (0 to 60 bar), V20B (-1 to 20 bar).
Alarm Relay Output: R <3 (alarm when pressure is less than 3 bars), R >16 (alarm when pressure is more than 16 bars).
Bezel Options: ALXS (Silver Eloxated), ALXB (Black Eloxated).
Sensor Cable Length: Standard lengths of 2, 5, or 10 meters.

Additional Components: The DPI system can include a remote pressure indicator (RPI20) for additional monitoring capabilities, suitable for cabin or monitor use with a range of 0-19.9 bars.

Catalog excerpts

DIGITAL PRESSURE INDICATOR-DPI The Digital Pressure Indicator - DPI is available in various ranges -from 0 to 20 bars, 0 to 60 bars and also as vacuum indicator from -1 to 20 bars. The Stainless steel pressure transducer obtain pressure information which is displayed on a 2 Vi digit super bright LED display. Two optional relay outputs can be programmed to meet customer needs (They switch when the pressure is within the limits or exceeds the limits, either over or under the limit). The indicator is able to communicate with other displays (remote pressure indicators) over the one wire datalink. PRESSURE INDICATOR PRESSURE TRANSDUCER Power supply Power consumption* Alarm relay output Pressure(reading) range Reading accuracy Pressure indication Transducer Electrical Connection Transducer pressure port fitting Transducer Housing Operating temperature-indicator Transducer cable Power supply voltage, max.6A 0 to 19.9 bars; 0 to 60 bars; -1.0 to 19.9 bars 20 bars and vacuum indicator: 0,1 bar; 60 bars indicator: 1 bar: 2 11I digit LED display (super bright), P67 (Transducer); IP67 (Indicator-front panel) 72x36x68 mm or 77.5x41.5x68 with Aluminium Bezel (LxHxW) 3x0,35mm2 (chemical and oil resistant) with connector M12,

Open the catalog to page 1

DIGITAL PRESSURE INDICATOR - DPI ORDERING INFORMATION Use the RED character from the chart below to construct a basic product code. SENSOR CABLE LENGTH IN M ALXS ... Silver Eloxated ALXB ... Black Eloxated MASTER UNIT DPI 20B 2 PRESSURE MEASURING RANGE ALARM RELAY OUTPUT Relay condition: pressure value or pressure range: R <3 alarm when the pressure is less than 3 bars R >16 alarm when the pressure is more than 16 bars R 3><8 alarm when the pressureis between 3 to 8 bars R 3<>8 alarm when the pressureis between 3 to 8 bars SLAVE UNIT - REMOTE INDICATOR REMOTE PRESSURE INDICATOR RPI20: additional...

Open the catalog to page 2

DIGITAL PRESSURE INDICATOR - DPI

DIGITAL PRESSURE INDICATOR - DPI

Catalog excerpts

All EMITTER catalogs and technical brochures

Archived catalogs