*mydirectindustry

FT10E FIRE

1 / 1 PageView full catalog

FT10E FIRE

Product catalog summary

Key Advantages of the FT10E:

Fast extinguishing and effective cooling using water mist.
Efficient gas precipitation capabilities.
Ability to reach hidden fire sources.
Proven effectiveness and compatibility with foam.
Various spray pattern options from water mist to full jet.

Typical Applications:

Recycling centers, landfills, oil & gas, chemical industry, wood processing industry, substations, tunneling, aircraft hangars, and large storage areas with high fire loads.

Optional Accessories:

Different diaphragm valves (with/without heating function).
Wired control panel (remote keyboard).
Remote control options.
Various monitor types and nozzle heads.
Activation via CAN bus or 4 signal contacts.

Stationary Fire Protection with Water Mist Turbine:

The FT10E represents a new generation of stationary fire-fighting equipment with a 360° operating range. It applies water mist from a long distance with high accuracy, acting as an effective cooling agent to extinguish fires with less water. It is easily integrated into existing systems.

Technical Specifications:

Electrical Characteristics:
- Nominal voltage: 400 V
- Nominal current (max.): 29 A
- Nominal power of largest motor (max.): 12.5 kW
Dimensions:
- Length with transport frame: 1,928 mm
- Width with transport frame: 1,520 mm
- Height with transport frame: 1,947 mm
- Total height with transport frame: 2,230 mm
- Operating radius (turbine in horizontal position): 1,035 mm
Weight:
- Turbine only (without base frame): 680 kg
- Total weight with base frame (w/o accessories): 1,000 kg
Oil Hydraulic System:
- Hydraulic unit power: 0.75 kW
- Operating pressure max.: 80 bar
- Pump displacement volume: 5.7 l/min
- Rotation speed at 5.7 l/min: 2 rpm
- Lowering speed: 0.032 m/sec
- Lifting speed: 0.051 m/sec
Water Hydraulic System:
- Operating pressure: 2 - 16 bar
- Flow rate at 10 bar: up to 2,700 l/min
Other Information:
- Propeller speed: 2,910 rpm
- Turbine incline: -19° to +43°
- Swing: 362°
- Turbine air flow rate (net): 32,000 m3/h
- Turbine thrust (air only): 500 N
- Turbine thrust, air and 2,000 l/min water: 1,500 N
- Water connection: Camlock male in 1x4”
- Noise generated (@20 m distance): 70 dB (LA)
- Operating temperature: 0 to +50°C
Nozzles:
- Fixed nozzles - Quadrijet: 20 pcs
- Fixed nozzles - opening angle: 50°

Catalog excerpts

Stationary Fire Protection with Water Mist Turbine The FT10e ﬁre-ﬁghting turbine represents a new generation of stationary ﬁre-ﬁghting equipment. It has a 360° operating range, applying water mist from a long distance with a high degree of accuracy. Water mist acts as an effective cooling agent to extinguish a ﬁre with less water. This makes the FT10e a unique, cutting-edge extinguishing system. The FT10e is also very easily integrated into existing systems. ELECTRICAL CHARACTERISTICS Nominal voltage Nominal power of largest motor (max.) JANUARY 2022 – RESERVE TECHNICAL CHANGES DIMENSIONS Length with transport frame Width with transport frame Height with transport frame Total height with transport frame Operating radius (turbine in horizontal position) WEIGHT Turbine only (without base frame) Total weight with base frame (w/o accessories) Hydraulic unit power Hydraulic unit operating pressure max. Hydraulic unit pump displacement volume Fast extinguishing and effective cooling with water mist Highly efficient gas precipitation Water mist reaches hidden sources of ﬁre Tried, tested and proven effectiveness Works with foam too Different spray pattern options (water mist to full jet) Rotation speed (spin) at 5.7 l/min Hydraulic cylinder - lifting speed WATER HYDRAULIC SYSTEM Operating pressure Propeller speed Swing Turbine air ﬂow rate (net) Different diaphragm valves (with/without heating function) Wired control panel (remote keyboard) OTHER INFORMATION Turbine incline AVAILABLE OPTIONAL ACCESSORIES FOR THE FT10E: Hydraulic cylinder - lowering speed Remote control Turbine thrust (air only) Different monitor types Turbine thrust, air and 2,000 l/min water Different nozzle heads Water connection - Camlock male Activation either via CAN bus or 4 signal contacts Noise generated (@20 m distance) Operating temperature TYPICAL APPLICATIONS Recycling centers, landﬁlls, oil & gas, chemical industry, wood processing industry, substations, tunneling, aircraft hangars and large storage areas with high ﬁre loads Fixed nozzles - Quadrijet Fixed nozzles - opening angle EMICONTROLS SRL /GMBH · VIA COPERNICO 6A · I-39100 BOLZANO/BOZEN · T +39.

Open the catalog to page 1

FT10E FIRE

FT10E FIRE

Catalog excerpts

All EMICONTROLS SRL catalogs and technical brochures