Solenoid Valves & Coils The 240RA is a 2-way, normally closed diaphragm valve. 240RA valves are used for liquid, suction, and hot gas service. • One coil fits all valve sizes • Can be brazed into the line without disassembly • PTFE diaphragm for high temperature applications • Extended ends for easy installation (standard) • Long-life molded coils • Mounting stud models can be field converted to manual stem • Manual stem or mounting stud Maximum fluid temperature: Maximum working pressure: MOPD: UL/CUL file number: Mounting enclosing tube more than 90o off vertical up position is not recommended. Valve Series Design Series Connection Type T = copper entended ends M = manual stem T = mounting stud (optional) * NOTE: Valves are shipped without the solenoid coils (VLC = Valve Less Coil). See coil assemblies for availability. **NOTE: Letter “H” is no longer used since all 240RA valves now contain the high temperature diaphragm for hot gas. Ordering Information and Nominal* Liquid Capacity Table – Tons (kW) PCN Standard Mounting Valve Stud1 Connection Size Add “T” to the end of description for Mounting Stud Add “M” to the end of the description for Manual Stem Capacities based on 100°F liquid and 40°F saturated evaporator per ARI standard 760-87. *See Extended Capacity Tables for ratings at a wide range of conditions. Emerson Climate Technologies

Solenoid Valves & Coils (BOTH SIDES] WITH MANUAL STEM - "M" VERSION Valve Kits Exploded View COIL ASSEMBLY ENCLOSING TUBE ENCLOSING TUBE HOLD DOWN SPRING BODY ASSEMBLY MANUAL OPERATOR STEM ASSEMBLY Emerson Climate Technologies