video corpo

Data SheetPage -1Ovation™ Power Supply System
5Pages

{{requestButtons}}

Catalog excerpts

Data SheetPage -1Ovation™ Power Supply System - 1

Data Sheet Ovation™ Power Supply System(5X00785G09) Features ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ Redundant power configurations, each with separate external wide-range AC or DC feeds Separate main and auxiliary supplies in both the primary and secondary configurations Dual wide-range input capabilities Diode auctioneered power feeds High-efficiency power supplies Modular fanless systems Redundant power feeds to each controller chassis and to the I/O modules Continuous system monitoring Emerson has developed a DIN-rail mounted power supply incorporating four modular fanless powering systems to provide reliable and stable power to the Ovation™ controller and I/O modules. Benefits of the Ovation power supply scheme include: The Ovation controller powering system uses redundant configurations, each with separate, external wide-range AC and/or DC input feeds. Dual diode auctioneered 24 VDC outputs are used to power each controller chassis and associated I/O modules, as well as loops and contact wetting to the I/O modules. If required a 48 VDC auxiliary power for loops and contact wetting can also be provided. Two separate output schemes are available: ▪ ▪ 24 VDC / 10 A / 240 W main and 24 VDC / 10 A / 240 W auxiliary power 24 VDC / 20 A / 480 W main and 24 VDC / 20 A / 480 W auxiliary power Separate main and auxiliary power supplies allow easy replacement Elimination of cooling fans greatly reduces failure risks Diode auctioneered power feeds assure continuous power availability New design increases efficiency, reduces heat generation and enhances equipment life expectancy Dual input (AC and DC) capability reduces spare parts Hot-swappable power supplies enable on-line replacement Quick installation of the power supplies minimizes downtime and production loss Power factor

Open the catalog to page 1
Data SheetPage -1Ovation™ Power Supply System - 2

Ovation™ Power Supply System Data Sheet The 10-amp powering scheme includes: The 20-amp powering scheme includes: Redundant power supply configurations (primary and secondary) that contain separate 10-amp main and auxiliary power supplies and support a wide range of input voltages (85-264 VAC @ 4367 Hz or 90-375 VDC) with an output power of 240 W. A power distribution module that distributes diode auctioneered outputs to both the controller and I/O busses. The 10-amp scheme consists of a back-plate with pre-mounted DIN-rails to which the power distribution module, circuit breakers and four...

Open the catalog to page 2
Data SheetPage -1Ovation™ Power Supply System - 3

Ovation™ Power Supply System Data Sheet 10 A, 24 VDC Powering Module Characteristics (1X01046) Power Back Immunity Nominal Output Current Rating Peak Current 1.5 x nominal current for 4 sec min while holding voltage > 20 VDC Short Circuit Current 1.5 x nominal current at near zero volts at short circuit condition Hold-up Time Tolerance > 20 ms (full load, 100 VAC input @ ambient temperature = +25°C (+77°F) > +2.0% overall Voltage Fall Time < 150 ms from 95% to 10% rated voltage @ full load and Tamb Time and Temperature Drift EN61000-6-2: 2001 EN61000-6-3: 2001 EN55011 Class B, radiated...

Open the catalog to page 3
Data SheetPage -1Ovation™ Power Supply System - 4

Ovation™ Power Supply System Data Sheet 10 A, 24 VDC Powering Module Characteristics (1X01046) Protection Features Fusing (input) Internally fused ▪ Outputs are capable of providing high currents for short periods of time for inductive load startup or switching. ▪ Fusing may be required for wire/loads if 2x nominal O/P current rating cannot be tolerated. Continuous current overload allows for reliable fuse tripping. IP20 (EN60529) Fully enclosed metal housing with fine ventilation grid to keep out small parts 20 A, 24 VDC Powering Module Characteristics (1X01047) AC and DC Inputs Nominal AC...

Open the catalog to page 4
Data SheetPage -1Ovation™ Power Supply System - 5

Ovation™ Power Supply System Data Sheet 20 A, 24 VDC Powering Module Characteristics (1X01047) EMC and Certifications EMC Emissions EN61000-6-2: 2001 EN61000-6-3: 2001 EN55011 Class B, radiated emissions EN61000-3-2: 2001 EN61000-6-1; 2001 EN61000-6-2: 2001 EN61000-4-2: Level 4, electrostatic discharge EN61000-4-3: Level 3, radiated immunity EN61000-4-4: Level 4 input and level 3 output, fast transient immunity EN61000-4-5: Isolation class 4, surge immunity EN61000-4-6: Level 3, conducted RF immunity EN61000-4-11: Voltage dips, variations IEC 61000-4-34: Voltage dip immunity standard CE...

Open the catalog to page 5

All Emerson catalogs and technical brochures