26-2300 series
4Pages

{{requestButtons}}

Catalog excerpts

26-2300 series - 1

26-2300 SeriesRegulators - Relief / Backpressure Specifications For other materials or modifications, please consult TESCOM. operating parameters Pressure rating per criteria of ANSI/ASME B31.3 Maximum Inlet Pressure 0-50, 0-150, 0-250 psig / 0-3.4, 0-10.3, 0-17.2 bar Design Proof Pressure 150% maximum rated Leakage Bubble-tight Operating Temperature1 -40°F to 165°F / -40°C to 74°C Flow Capacity Cv = 0.60 Maximum Operating Torque 25 in-lbs / 2.8 N^m 1. For extended temperatures from -40°F to 400°F/ -40°C to 204°C, please consult TESCOM. media contact materials Body 303 stainless steel, 316 stainless steel, or Aluminum 2024-T351 Diaphragm Buna-N Main Valve Seat Teflon® O-Rings Buna-N Seals Teflon® Remaining Parts 300 series stainless steel other Cleaning CGA 4.1 and AsTM G93 Weight Stainless Model: 2.25 lbs / 1.0 kg Aluminum Model: 1.25 lbs / 0.6 kg Teflon® is a registered trademark of E.I. du Pont de Nemours and Company. Tescom TEsCOM 26-2300 series is a highly accurate, diaphragm sensed backpressure regulator. It controls pressures up to 500 psig / 34.5 bar and offers many Cvs from 0.02 up to 1.0. Air and dome loaded versions are available for remote operation or for use with the TEsCOM ER5000 Electropneumatic Controller for automation. Applications • Hydraulic or pneumatic testing • Calibration • Pump discharge pressure control Features and Benefits • Crack to reseat - 2% of set pressure • Easily adjusted, low torque handknob control • Bubble-tight shutoff at all reseat pressures • Four flow capacities available: Cv = 0.60 standard Cv = 0.06, 0.12, 1.0 optional • Spring, dome, and air loaded models are available • Panel mounting is standard • Compatible with TEsCOM ER5000 Electropneumatic Controller

Open the catalog to page 1
26-2300 series - 2

26-2300 Series Regulator Drawings spring load dome load All dimensions are reference & nominal Metric [millimeter] equivalents are in brackets

Open the catalog to page 2
26-2300 series - 3

26-2300 Series Regulator Flow Charts For more information on how to read flow curves, please refer to the Flow Curves and Calculations document (debul2007x012) in the TESCOM catalog or on www.tescom.com. INLET PRESSURE - psig [bar] INLET PRESSURE - psig [bar] INLET PRESSURE - psig [bar] INLET PRESSURE - psig [bar] INLET PRESSURE - psig [bar] INLET PRESSURE - psig [bar] INLET PRESSURE - psig [bar] FLOW RATE - SCFM [SLPM] NitrogenSCFM [SLPM] Nitrogen [SLPM] Nitrogen FLOW RATE FLOW RATE - SCFM - [SLPM] - Nitrogen - SCFM [SLPM] Nitrogen- SCFM [SLPM] NitrogenSCFMSCFM Nitrogen FLOW RATE FLOW RATE...

Open the catalog to page 3
26-2300 series - 4

26-2300 Series Regulator Part Number SelectorLearn more about common options. For modifications, repair kits and accessories, contact factory. Example for selecting a part number: A WARNING! Do not attempt to select, install, use or maintain this product until you have read and fully understood the TESCOM Safety, Installation and Operation Precautions. D26230694X012 © 2014, 2017 Emerson Process Management Regulator Technologies, Inc. All rights reserved. 08/2017. Tescom, Emerson Process Management, and the Emerson Process Management design are marks of one of the Emerson Process Management...

Open the catalog to page 4

All Emerson Automation Solutions - TESCOM catalogs and technical brochures

  1. 26-2000 Series

    16 Pages

  2. WEGA-SP

    4 Pages

  3. DH-16 SERIES

    4 Pages

  4. SG1 SERIES

    8 Pages

  5. 56 SERIES

    4 Pages

  6. ER5000 Series

    12 Pages

  7. Level

    3 Pages