Fixed Gas Detector Calibration Kits Product Data Sheet Fixed Gas Detector Calibration Kits Toxic and Combustible Gas Sensors All gas sensors must be calibrated to on-site environmental conditions once installation is complete. Net Safety Monitoring gas sensors are calibrated to factory conditions before shipment to verify operation but accurate response to gas must be again be verified prior to using the device. Regular checks and calibrations are also essential to ensure that the detectors are ready to respond at all times. Net Safety Calibration Kits do not come with gas cylinders, they must be ordered separately. Fixed Gas Detector Calibration Kits Specifications Table 1 - Kit Configurations Calibration Kit 1 (1) Regulator 0.5 LPM & Pressure Indicator, (1) CCS–1 Cup Adaptor, (1) Carrying Case, 3 Feet Tygon Tubing Calibration Kit 2 (1) Stainless Steel Regulator 0.5 LPM & Pressure Indicator, (1) CCS–1 Cup Adaptor, (1) Carrying Case, 3 Feet Tygon Tubing Calibration Kit 3 (1) Regulator 1.0 LPM & Pressure Indicator, (1) CCS–SIR100 Cup Adaptor, (1) Carrying Case, 3 Feet Tygon Tubing

Fixed Gas Detector Calibration Kits Product Data Sheet Table 2 - Part Number and Description Part Number 50 % LEL Methane Calibration Cylinder (1000 PSI /103 L) 50 % LEL Propane Calibration Cylinder (1000 PSI /103 L) 50 % LEL Hydrogen Calibration Cylinder (1000 PSI /103 L) Combustible Gas Cylinders - Balance Air 50 % LEL Butane Calibration Cylinder (1000 PSI /103 L) 50 % LEL Iso-Butane Calibration Cylinder (1000 PSI /103 L) 50 % LEL Pentane Calibration Cylinder (1000 PSI /103 L) 50 % LEL Ethylene Calibration Cylinder (1000 PSI /103 L) Toxic Gas Cylinders - Balance Nitrogen Toxic Gas Cylinders...