Product Data Sheet Process Gas Analyzer Cascade’s CT5400 is a multicomponent QCL, TDL analyser for laboratory and process analytics. This product represents the next generation of gas analyzers and sensors, with the ability to measure up to 20 gases and an interchangeable modular configuration for up to 9 lasers. An embedded ARM processor gives fully autonomous intelligent operation. The CT5400 is Cascade’s most powerful analyzer to date. Cascade’s new measurement platform is ideal for environmental monitoring applications, with the capability to detect NOx, SOX, CO, CO2, CH­4, NH3 and in the near future O2, HF, HCl, and other combustion gases identified as pollutants, ozone depleting, or responsible for global warming. With increasing legislation from the EPA and EU, as well as other international regulatory agencies, large industrial facilities, incinerators, combustion plants, and other industrial gas emitting facilities will have to more actively monitor their emissions. The CT5400 can handle a myriad of applications, including process analysis monitoring, continuous emissions monitoring (CEM), continuous ambient monitoring (CAM), DeNOx/SCR, and ammonium nitrate precursor analysis. With a large suite of analysis capabilities, the CT5400 has crossplatform applications including propulsion emissions and industrial process monitoring. Multicomponent QCL, TDL analyzer for laboratory and process analytics JJ "True multicomponent" analyzer – up to 20 gases JJ All solid state, no moving parts JJ Low maintenance and low lifetime cost Field serviceable and field configurable JJ Interchangeable modular configuration for up to 9 lasers Our most powerful QCL analyzer to date JJ Embedded ARM processor for fully autonomous JJ intelligent operation Enhanced dynamic range JJ From sub ppb to % to meet all your measurement needs Mount options JJ Available in wall mount and rack mount configurations Sample cell and sample handling configurable to suit your application needs: JJ Processor monitoring JJ Continuous Emissions Monitoring (CEMs) JJ Continuous Ambient Monitoring (CAMs) JJ DeNox/SCR JJ Ammonium nitrate precursors JJ Other applications available on request

Specifications Table 1 - CT5400 Process Gas Analyzer Specifications Value Application Measurement technique Laser classification CLASS 1 BS EN 60825-1:2007 Safety of laser products Equipment classification and requirements (identical to IEC 60825-1 2007) Performance Repeatability Measurement rate Environmental Temperature range Sample gas temperature range Humidity range Protection class Hazardous area classification Inputs and Outputs Analogue signal out 6 x 4–20 mA measurement output (option) 4–20 mA signal input (option) 3 x normally closed contact fault relay outputs Modbus TCP, RTU [option],...

Table 2 - Measurement Performance Name Nitric oxide Nitrogen dioxide Carbon monoxide Carbon dioxide Sulpher dioxide Nitrous oxide Hydrogen peroxide Hydrogen fluoride Hydrogen chloride Hydrogen sulphide Other gases and ranges are available on request. The ranges and detection limits provided indicate typical analyzer performance but may change depending on your application. Please contact Rosemount Analytical for more information.

Product Data Sheet Recommended Installation The drawings below represent the minimum recommended installation guidelines for the CT5400 Process Gas Analyzer. Please consult Rosemount Analytical for detailed installation recommendation of your application. Figure 1 - CT5400 Process Gas Analyzer Emerson Process Management Glendevon House Castle Business Park, FK9 4TZ ©2015 Emerson Process Management. All rights reserved. The Emerson logo is a trademark and service mark of Emerson Electric Co. Rosemount Analytical is a mark of Emerson Process Management family of companies. All other marks are the...