226-30-0020 Series CANopen® Digital Differential Pressure and Temperature Transmitter
6Pages

{{requestButtons}}

Catalog excerpts

226-30-0020 Series CANopen® Digital Differential Pressure and Temperature Transmitter - 1

Product Data Sheet April 2016 226-30-0020-DS, Rev D Paine 226-30-0020 Series Pressure Transmitter CANopen® Digital, Submersible Differential Pressure and Temperature The 226-30-0020 Series CANopen® Submersible Differential Transmitters offer precise pressure measurement of liquids and gases from 0-10,000 PSID (690 BAR), with the added value of temperature measurements from +25 °F to +175 °F (-4 °C to +80 °C). Industry standard CANopen®, Subsea Instrumentation Interface Standardization (SIIS) Fault Tolerant Level 2 output, the 226-30-0020 Series is fully submersible and perfect for subsea networking solutions providing high resolution differential measurement, reliability and performa

Open the catalog to page 1
226-30-0020 Series CANopen® Digital Differential Pressure and Temperature Transmitter - 2

Paine 226-30-0020-DS Solutions ■ Fully Submersible. ■ CANopen® Network Ready. ■ Digital Measurement Accuracy. ■ Pressure and Temperature. ■ Universal Mounting. Potential Applications ■ Subsea Processing, Pressure and Temperature. ■ Control Pod Pressure and Temperature ■ Wellhead Pressure and Temperature. ■ ROV Controls. ■ Subsea Hydraulic Controls. Features ■ Differential Pressure Range: 0-10,000 PSID (690 BAR) each port. ■ External Case Pressure: 6,000 PSI (414 BAR). ■ Operating Temperature: +25 °F to +175 °F (-4 °C to +80 °C). ■ Digital Output: CANopen®, CIA 443 (Fault Tolerant SIIS Level...

Open the catalog to page 2
226-30-0020 Series CANopen® Digital Differential Pressure and Temperature Transmitter - 3

Pressure Range: Contact factory for additional pressure ranges. Proof Pressure: 3/8-in. female Autoclave Engineers medium pressure fitting. Fitting torque: 25-30 ft-lb. Weight: 30.0 oz maximum. Electrical Digital Output: CANopen®. Meets the requirements of CIA 433, Subsea Instrumentation Interface Standardization (SIIS) Level 2, Fault Tolerant. Input Voltage: 20 — 27 VDC. Input Current: 25 mA maximum. Insulation Resistance: All pins together to case. 1,000 M Q minimum at 50 VDC, 75 °F ±10 °F (24 °C to ± 6 °C). Over Voltage Protection: Protected from damage up to 36 VDC. Reverse Polarity:...

Open the catalog to page 3
226-30-0020 Series CANopen® Digital Differential Pressure and Temperature Transmitter - 5

This page is intentionally left blank.

Open the catalog to page 5
226-30-0020 Series CANopen® Digital Differential Pressure and Temperature Transmitter - 6

Product Name Product Data Sheet Rosemount Specialty Product LLC Emerson Process Management 5545 Nelpar Drive East Wenatchee, WA 98822, USA +1 509 881 2100 +1 509 881 2115 Paine.Products@Emerson.com Standard Terms and Conditions of Sale can be found at: Emerson.com/en-us/pages/Terms-of-Use.aspx The Emerson logo is a trademark and service mark of Emerson Electric Co. The Paine brand and Paine logotype are trademarks of Emerson Electric Co. All other marks are the property of their respective owners. © 2016 Emerson Process Management. All rights reserved.

Open the catalog to page 6

All Emerson Automation Solutions - ROSEMOUNT catalogs and technical brochures

  1. TankRadar Pro

    32 Pages

  2. SW-300

    4 Pages

  3. DL8000

    12 Pages

  4. AMS Suite

    16 Pages

  5. Line Card

    2 Pages

Archived catalogs