Network Isolator for the Industrial Environment - Provides overvoltage protection from galvanic isolation - Easy handling - Plug and play; does not require software, drivers or a power supply - Compact and universally applicable - DIN rail mounting compatible by optional bracket - FCC Part15B; ICES-003 - CE: EN55032/EN55035 certified - LVD (IEC/EN62368-1) certified The Gigabit network supported Ethernet Network Isolator connects to an Ethernet network to protect the network industrial environment. The Network Isolator provides separation of all conductive connections (especially data and shielded conductors) between the devices connected together via the Ethernet network. The Network Isolator can prevent the current flow caused by the potential difference, and protect the connected equipment and its users from the influence of external stray voltage and surge. These external stray voltage and surge may be directly or inductively coupled to network lines caused by installation errors, lightning, switching operations, etc. and electrostatic discharge. The Network Isolator is used to protect equipment to avoid damage and the engineer who works near the equipment. It meets all the structural requirements of IEC/EN 62368-1, thereby effectively eliminating the risk of electric shock caused by external stray voltage. It has excellent Ethernet performance and high dielectric withstand voltage. It also provides multiple possibilities for installation on flat surfaces and DIN rails. EmCom Technology Inc. 7F, No. 219, Sec. 3, Nanjing E. Rd., Taipei 10488, Taiwan Tel: +886-2-27177766｜ Fax: +886-2-27171800｜ [email protected]

Optional accessory for DIN Rail Mounting P/N 1000032, DIN Rail Clip