Catalogs >
EmCom Technology Inc. >
2MOPP Ethernet Isolator, Box Type

2MOPP Ethernet Isolator, Box Type
1 / 2Pages

Catalog excerpts

- Isolates harmful leakage currents on a data network to protect patients and equipment - Easy handling - Plug and play; does not require software, drivers or a power supply - Compact and universally applicable - DIN rail mounting compatible by optional bracket - UL/C-UL: ANSI/AAMI ES60601-1 Ed.3.2, CAN/CSA C22.2 No.60601-1 Ed.3.2 - IEC/EN 60601-1(Ed.3.2) & IEC/EN60601-1-2(Ed.4.1) certified - IEC/EN 62368-1: 2014/COR1: 2015 and EN 62368-1: 2014/A11: 2017 certified The Gigabit network supported Ethernet Network Isolator connects to an Ethernet network to protect patients from dangerous leakage currents. The Ethernet isolator complies with IEC/EN60601-1(Edition 3.2) and IEC/EN60601-1-2(Edition 4.1) of safety and EMC standards for a network connection between a medical device and an Ethernet network or non-medical device (PC or laptop). In accordance with the IEC/EN60601-1 standard for medical electrical devices and systems, the Ethernet Network Isolator protects the network interface by two independent protective measures (2 MOPP) to the patient and the network connection is safely galvanically isolated. The medical Ethernet Network Isolator protects staff, patients and medical technology equipment in patient care vicinities from dangerous leakage currents that can travel through a copper-based Ethernet network. It effectively isolates medical equipment to protect patients, yet allows data to flow at Gigabit Ethernet speeds. To install In-Line on an Ethernet network, this Ethernet Network isolator has two RJ45 ports and acts as a coupler to connect medical equipment and a computer or data network. Plugand-play design provides the fast and easy way of installation. Patients, users/staff, inventory and third parties are protected from dangerous leakage currents that can flow over the data network with job done in few seconds. EmCom Technology Inc. 7F, No. 219, Sec. 3, Nanjing E. Rd., Taipei 10488, Taiwan Tel: +886-2-27177766｜ Fax: +886-2-27171800｜ cabling@emcom.com.tw

Open the catalog to page 1

Category Product Number Input Interface Output Interface Protection Rating Mating Cycles Performance Category AC Dielectric Strength DC Dielectric Strength Total Leakage Current Working Voltage Insulation Section Operating Temperature Air Humidity Certifications UL/C-UL Recognized IEC/EN60601-1(Edition 3.2) IEC/EN60601-1-2(Edition 4.1) IEC/EN62368-1 Low-voltage directive EMC directive RoHS SVHC/REACH Lead-free Optional accessory for DIN Rail Mounting P/N 1000032, DIN Rail Clip

Open the catalog to page 2

2MOPP Ethernet Isolator, Box Type 1 / 2Pages

Catalog excerpts

All EmCom Technology Inc. catalogs and technical brochures

2MOPP Ethernet Isolator, Box Type
1 / 2Pages