Catalogs >
EmCom Technology Inc. >
2MOPP Ethernet Isolator, Box Type

2MOPP Ethernet Isolator, Box Type
2Pages

Catalog excerpts

- Isolates harmful leakage currents on a data network to protect patients and equipment - Easy handling - Plug and play; does not require software, drivers or a power supply - Compact and universally applicable - DIN rail mounting compatible by optional bracket - IEC 60601-1 & IEC 60601-1-2 certified - IEC 62368-1: 2014/COR1: 2015 and EN 62368-1: 2014/A11: 2017 certified - UL Listed The Gigabit network supported Ethernet Network Isolator connects to an Ethernet network to protect patients from dangerous leakage currents. The Ethernet isolator complies with IEC 60601-1 and EMC/IEC 60601-1-2 safety standards for a network connection between a medical device and an Ethernet network or non-medical device (PC or laptop). In accordance with the IEC EN 60601-1 standard for medical electrical devices and systems, the Ethernet Network Isolator protects the network interface by two independent protective measures (2 MOPP) to the patient and the network connection is safely galvanically isolated. The medical Ethernet Network Isolator protects staff, patients and medical technology equipment in patient care vicinities from dangerous leakage currents that can travel through a copper-based Ethernet network. It effectively isolates medical equipment to protect patients, yet allows data to flow at Gigabit Ethernet speeds. To install In-Line on an Ethernet network, this Ethernet Network isolator has two RJ45 ports and acts as a coupler to connect medical equipment and a computer or data network. Plugand-play design provides the fast and easy way of installation. Patients, users/staff, inventory and third parties are protected from dangerous leakage currents that can flow over the data network with job done in few seconds. EmCom Technology Inc. 7F, No. 219, Sec. 3, Nanjing E. Rd., Taipei 10488, Taiwan Tel: +886-2-27177766｜ Fax: +886-2-27171800｜ cabling@emcom.com.tw

Open the catalog to page 1