UMILL 1500 / 1800 5-axis milling and turning centre for complete machining

When it comes to typical 5-axis machinings, the UMILL 1500 and Umill 1800 are well equipped for any application. The Umill 1500 and 1800 can show their perfomances in milling, drilling, tapping and turning in one set-up. Thanks to the portal construction, they reach optimum results due to their particularly stable and rigid design in combination with maximum dynamics and precision. optimally equipped for 5-axis machining MORE COMPACT CONSTRUCTION / he chip conveyors are integrated in the machine bed T / No foundation - flexible installation possible / Expandable with pallet solution MACHINE BASE...

Today, modern production is only feasible if the degree of utilization of the machinery is optimally exploited. Automation is a central factor here, because the market demands fast reaction and short production times. With our modular solutions you are well prepared for these challenges and remain competitive. E58G 12000 rpm / 45 kW / 300 Nm (Standard equipment for milling and turning operations) E61G 20000 rpm / 50 kW / 100 Nm (High Speed version only for milling operations) TOOL MAGAZINE WITH UP TO 203 PLACES MILLING head with electrospindle Rotary Table Placed outside the working area and...

TECHNICAL HIGHLIGHTS Rotary Table With the powerful milling spindle and the high accuracy of the Umill machines, all technical requirements can be implemented precisely and efficiently. The 5-axis simultaneous machining is fully possible on all UMILL machines in the basic configuration and guarantees a high surface quality. The rotary table for milling and turning operations in simultaneous positioning. Designed for workpieces up to 3,500 / 5,000 kg (UMILL 1500/1800) (Milling/Turning operation) UMILL COMPLETE MACHINING PROCESS AUTOMATION Individual automation solutions are possible in almost...

MACHINE DIMENSIONS UMILL 1800 MACHINE DIMENSIONS UMILL 1500

WORK AREA UMILL 1800 Axis travel Axis travel X (transverse axis) Rotation range of the milling head on the A axis (0=vertical) Rotation range of the milling head on the A axis (0=vertical) NC rotary table Inner width of the portal: 1860 mm WORK AREA UMILL 1

FLOOR PLAN UMILL 1800 FLOOR PLAN UMILL 1500

Axis Travel instead of Displacement Linear axes UMILL 1500 UMILL 1800 Magazine Places UMILL 1500 UMILL 1800 X (transverse axis) Y (horizontal axis) Z (vertical axis) Feed rate Magazine Places NC - Rotary table basic equipmentNC Control system Heidenhain TNC 640 HSCI TNC 640 HSCI Size Max. load Drive Max. torque Max. Speed UMILL 1500 / 1800 Size Max. load Drive Max. torque Max. Speed Workpiece/tool cooling External cooling 28 i/min; 6 bar 28 i/min; 6 bar Internal cooling 20 i/min; 40 bar 20 i/min; 40 bar Tank volume 2500 i (Paper band filter) 2500 i (Paper band filter) Coolant pumps for inside/outside...

EMCO Mecof S.r.l. / Via Molino 2 / 15070 Belforte Monferrato AL / Italia / T +39 0143 8201 / F +39 0143 823088 / [email protected] EMCO GmbH / Salzburger Str. 80 / 5400 Hallein-Taxach / Austria / T +43 6245891-0 / F +43 624586965 / [email protected] www.emco-world.com EN9051 . 03/20 . Technical modifications reserved. Errors and omissions excepted. beyond standard