Travelling column Machining Center MMV 2000
9Pages

{{requestButtons}}

Catalog excerpts

Travelling column Machining Center MMV 2000 - 1

MMV 3200 Moving Column Machining Center

Open the catalog to page 1
Travelling column Machining Center MMV 2000 - 2

Moving Column Machining Center for 3, 4, or 5 axes machining of big and heavy parts for small to medium lot sizes. Rapid travel up to 50 m/min with the utmost in precision. The superstructure is highly rigid, even for heavy work pieces weighing up to 5000 kg. Maximum Precision – Also with Large Dimensions Tool magazine / ool changer with 40 tools and up to 120 tools depending on T the machine‘s configuration / Thanks to the lateral magazine door (2x in case of pendulum machining), it is possible to check and set up the tools in parallel with the machining process (only in case of static...

Open the catalog to page 2
Travelling column Machining Center MMV 2000 - 3

TECHNICAL Highlights High-performance motor spindle with a speed range of 0-15000 rpm, an output of 46 kW and a torque of 125 Nm (S1), B and C-axes equipped with torque motors and encoders, linear scales in the X, Y and Z-axes included as standard. These are all features which make the MMV 3200 the ideal machining centre for high-quality milling performances and allow for the complete machining of complex workpieces with excellent surfaces. Tool magazine Milling spindle Available with steady tool magazine on 3-, 4- or 5-axes-version, or with moving chain magazine on 4- and 5-axes-version....

Open the catalog to page 3
Travelling column Machining Center MMV 2000 - 4

/ lexible modular construction and F /Workpiece and tool measurement / Thermal compensation of the milling spindle /Coolant through the spindle / Coolant filter systems with high-presssure ergonomic, attractive design /Automatic doors / High-performance motor spindle /Hydraulic device for clamping systems / igid linear roller guides size 55 R / Rotary coupling through the round table / Second integrated rotary table for 5-axis machining in pendulum operation / Direct driven ball screws on the Y- and Z-axis, precise and quiet operation Machine structure The machine bed is a stable,...

Open the catalog to page 4
Travelling column Machining Center MMV 2000 - 5

Staying in touch is important not only among human beings. Persons, machines and the whole framework of production must also be connected perfectly and safely in order to ensure efficient procedures during the production process. with EMconNEcT you have the key to optimized connectivity for a digital factory. Perfectly integrated into numerical control, EMconNEcT enhances this type of system by its powerful functions for the modern generation of controllers (SiEMENS, HEIDENHAIN, FANuC). integration into control EMCONNECT offers several possibilities of operation according to different...

Open the catalog to page 5
Travelling column Machining Center MMV 2000 - 6

MACHINE LAYOUT WORK AREA WITH STATIONARY MAGAZINE - PENDULUM MACHINING 5-AXES MMV 3200 "Pendulum working area (V AXES) ^ ^Area di lavoro in pendolare (V ASSI)^

Open the catalog to page 6
Travelling column Machining Center MMV 2000 - 7

"Pendulum working area N Area di lavoro in pendolare^ "Pendulum working area (V AXES) ^ ^Area di lavoro in pendolare (V ASSI)^

Open the catalog to page 7
Travelling column Machining Center MMV 2000 - 8

TECHNICAL DATA Travel Tool magazine (alongside column) Travel in X - axis 3200 mm Min. - max. distance spindle nose - table (vertical) 0 - 950 mm Min. - max. distance spindle nose - table (horizontal) 250 - 1200 mm Length Width Slot size Number of slots Slot spacing Maximum table load (equally distributed) Rotary table Diameter Maximum table load Drive Number of tool stations (options) Changeover principle Tool management Max. tool diameter Max. tool diameter (without adjacent tools) Max. tool length Max. tool weight Max. tool magazine weight Tool magazine (stationary) Number of tool...

Open the catalog to page 8
Travelling column Machining Center MMV 2000 - 9

EMCO GmbH / Salzburger Str. 80 / 5400 Hallein-Taxach / Austria / T +43 6245891-0 / F +43 624586965 / info@emco.at www.emco-world.com EN6013 . 05/20 . Technical modifications reserved. Errors and omissions excepted. beyond standard

Open the catalog to page 9

All EMCO GmbH catalogs and technical brochures

  1. Emcoturn E65

    13 Pages