Multitasking Machine Hyperturn 65 Powermill
13Pages

HYPERTURN 65 PM G2 High-performance turning/milling center for complete machining

HIGH-PERFORMANCE TURNING/ MILLING CENTER More clearance, more power, more possibilities: with a spindle distance of 1400 mm, a powerful counter spindle which also allows 4-axis machining, a B-axis with a direct drive for complex 5-axis simultaneous milling operations and all proven, high-quality features of the Hyperturn series, the Hyperturn 65 Powermill-G2 is a powerful addition to every machine range. i MAIN SPINDLE 6 CONTROL / Integrated spindle motor (ISM) in synchronous technology - water-cooled / High drive power 29 kW / High torque 250 Nm / Large speed range 0 - 5000 rpm / Highly...

TOOL TURRET / 12 stations with BMT55P interface / 16 stations with BMT45P interface / Precision interface / Water-cooled direct drive: 12000 rpm / Max. coolant pressure: 50 (100) bar / Single-piece machine design / Torsion-resistant welded steel construction / Filled with HYDROPOL® special concrete TOOL MAGAZINE / Chain magazine with 40 (80/120) tool holders / Space-saving integration into the basic machine ROLLER GUIDES / In all linear axes / Large distance between the guides TOOL CHANGER / Servo-controlled swing-arm-type tool changer / Short changing times / Trouble-free operation BigBore...

MAIN SPINDLE MILLING SPINDLE MANUAL TOOL CHANGING With an output of 29 kW and 250 Nm torque, the main spindle is powerful enough to machine from bar-stock up to a diameter of 65 mm and chuck parts up to a diameter of ø 250 mm economically. A larger headstock with a bar capacity of 102 mm and a A2-8 spindle connection is available as an option. At 22 kW and 60 Nm and a max. speed of 12000 rpm, the HYPERTURN 65 Powermill-G2 supports state-of-the-art milling processes such as HSC or HPC. This means that complex turned and milled parts can be produced in an extremely efficient manner. Tools can...

/ High dynamics due to state-of-the-art spindle motor technology / All spindles liquid-cooled for optimum thermostability / High productivity due to short tool change times / Both tool systems can be used on both spindles / Bed design for maximum stability and oscillation damping / Excellent repeatability due to linear guides HOLDING BRAKE ON THE MAIN AND COUNTER SPINDLE PARTS EJECTOR ON THE COUNTER SPINDLE It is always the respective C-axis which is positioned for milling and drilling operations. Additionally, however, it is possible to clamp each spindle in any position. The parts ejector...

Staying in touch is important not only among human beings. Persons, machines and the whole framework of production must also be connected perfectly and safely in order to ensure efficient procedures during the production process. With EMCONNECT you have the key to optimized connectivity for a digital factory. Perfectly integrated into numerical control, EMCONNECT enhances this type of system by its powerful functions for the modern generation of controllers (SIEMENS, HEIDENHAIN, FANUC). Control Dashboard Machine Data System Integration into control EMCONNECT offers several possibilities of...

The EMCO short bar loaders. Universal and powerful. SHORT AND TO THE POINT. / Ing. Johann Brisker Brisker GmbH "All EMCO turning machines are automated with short bar or bar loaders, which frees up employees for other tasks and, as a consequence, increases productivity." The EMCO SL1200 is the perfect solution for automatic feeding and loading of cut-to-length bars. The key advantages are a small footprint and rapid loading times resulting from shorter strokes. The technology. The EMCO SL1200 can be used immediately as a “plug-and-play” solution. Their extremely small footprint enables...

THE EMCO GANTRY LOADER. INDIVIDUAL PROCESS OPTIMIZATION. Workpiece magazine Blank-specific pallet attachments enable oriented loading of blanks into the machine and increase the parts stock for unmanned production. Changeover times are reduced or eliminated thanks to the perfect adjustment to the customer‘s parts. GANTRY LOADER PALLET MAGAZINE (20 stations) GRIPPER SYSTEM 2 x 3-jaw double gripper head 33-jaw 4-station pallet attachment for tees 6-station pallet attachment for articulated brackets Multi-pallet attachment for a family of parts / Fully automatic loading and unloading of the...

FINISHED PART CONVEYOR WORKPIECE PICK-UP DEVICE / SMALL GANTRY Equipped with two NC axes and available as an option, the small gantry makes it possible to remove the finished parts from the counter spindle and the remaining bar material from the main spindle. The finished parts are carefully placed onto an accumulation conveyor. Max. part size: ø 100 x 400 mm; max. part weight: 10 kg TOOL MEASUREMENT The Miniportal is used to place the finished parts onto a conveyor belt with a usable storage surface of approx. 420 x 1350 mm. Since the belt is clocked, the sometimes highly complex parts are...

INSTALLATION PLAN Installation plan HT65 PM-G2 with band filter system and short bar loader Installation plan HT65 PM-G2 with band filter system and short bar loader INSTALLATION PLAN

WORK AREA Work area HT65 PM-G2 with 12-station BMT55 turret Machine layout HT65 PM-G2 with cooling unit and band filter system MACHINE LAYOUT

Work area Distance between spindle noses 1400 mm Maximum turning diameter 500 mm Traverse path counter spindle Z3 1150 mm Main spindle Speed range (infinitely variable) 0 - 5000 rpm Spindle bearing (inside diameter) 105 mm Spindle bore (excluding draw-back rod) 0 73 mm Drive power Main spindle (AC integrated-spindle motor) 29 kW Counter spindle (AC integrated-spindle motor) 29 kW Milling spindle - Powermill Maximum drive power 22 kW Type of tool shank HSK-T63 Holding torque of clamp 1600 Nm Interpolating drive torque 332 Nm Tool turret with BMT-interface and direct drive Dimensions / Weight...

EMCO GmbH / Salzburger Str. 80 / 5400 Hallein-Taxach / Austria / T +43 6245891-0 / F +43 624586965 / info@emco.at www.emco-world.com EN9042 . 12/19 . Technical modifications reserved. Errors and omissions excepted. beyond standard