HYPERTURN 65 PM HP High-performance turning/milling center for complete machining

Equipped with two turning spindles, a powerful milling spindle including a tool changer and a 40-slot magazine as well as with two lower tool turrets featuring 12 driven positions each, the new HYPERTURN 65 Powermill HP (HIGH PERFORMANCE) allows for maximum productivity, especially when it comes to the efficient production of small and medium-sized series with a high degree of variance. MAIN SPINDLE / Water-cooled Integrated Spindle Motor (ISM) in synchronous technology / High drive power 29 (37) kW / High torque 250 (360) Nm / Large speed range 0 - 5000 (4000/3500) rpm / Highly dynamic / Bar...

MAIN SPINDLE MILLING SPINDLE MANUAL TOOL CHANGING With an output of 29 (37) kW and 250 (360) Nm torque, the main spindle is powerful enough to machine from bar-stock up to a diameter of 65 (76/95) mm to chuck parts up to a diameter of 250 mm. A mechanical clamp brake ensures additional stability for high-performance milling. At 22 kW and 60 Nm and a max. speed of 12000 rpm, the HYPERTURN 65 Powermill HP supports state-of-the-art milling processes such as HSC or HPC. This means that complex turned and milled parts can be produced in an extremely efficient manner. Tools can be loaded into the tool...

Standard Apps NETWORKS ARE CREATED INDIVIDUALLY OUR SOLUTIONS AS WELL  Staying in touch is important not only among human beings. Persons, machines and the whole production environment must also be connected perfectly and safely in order to ensure efficient procedures during the production process. With EMCONNECT, the machine is optimally equipped for this purpose. The optional EMCONNECT Digital Services offer innovative online services for optimized machine operation. The user has always the control of the machine status. The automatic notification in case of malfunctions or standstill of the...

The EMCO short bar loaders. Universal and powerful. SHORT AND TO THE POINT. The EMCO SL1200 is the perfect solution for automatic feeding and loading of cut-to-length bars. The key advantages are a small footprint and rapid loading times resulting from shorter strokes. moveable for service purposes. Besides, it can comfortably be incorporated into the production process using the machine control‘s programme input masks. Minimum setup efforts are required when switching over to other bar diameters. The technology. The EMCO SL1200 can be used immediately as a “plug-and-play” solution. Their extremely...

WORK AREA Working area HT 65 PM HP with 12-position BMT55P turret INSTALLATION PLAN

Leistung und Momentenverlauf R9-ø95 Hauptspindel Leistung und Momentenverlauf HT 665 Hauptspindel Working area HT 65 PM HP with 16-position BMT45P turret Main and counter spindle ø 65 mm / ø 76 mm Leistung und Momentenverlauf Frässpindel 12.000 Milling spindle with max. 12000 rpm P [kW] 12 Tool turret with direct drive - BMT55P Tool turret with direct drive - BMT45P

Work area Swing over bed Distance between spindle noses Rapid traverse Maximum turning diameter Travel Milling spindle - Powermill Speed range Maximum torque Traverse path counter spindle Z3 Maximum drive power Type of tool shank Maximum torque Spindle bearing (inside diameter) Spindle bore (excluding draw-back rod) Speed range (infinitely variable) B-axis Travel range Holding torque of clamp Interpolating drive torque Tool magazine Tool storage capacity Maximum torque Spindle bearing (inside diameter) Tool cross-section for square-shank tools Shank diameter for boring bars Tool indexing time...

EMCO GmbH / Salzburger Str. 80 / 5400 Hallein-Taxach / Austria / T +43 6245 891-0 / F +43 6245 86965 / [email protected] www.emco-world.com EN 9086 . 08/22 . Technical modifications reserved. Errors and omissions excepted. beyond standard