MAXXTURN 25 Universal turning center for the complete machining of small, precision parts

The EMCO MAXXTURN 25. The perfect solution for the complete machining of small parts. Compact, economical and highly precise. Suitable for bar parts up to a diameter of 25 mm and chucked parts up to Ø 85 mm. Fitted with a counter spindle, Y-axis and driven tools. The tool turret offers space for 12 VDI16 tool holders. Through a total of 36 indexing positions, the number of tools can be increased up to 42 cutting edges. The MAXXTURN 25 is available with Siemens or Fanuc control. WORK AREA / Spacious / Free chip flow / Easy access COMPACT MACHINE DESIGN / Requiring minimal floor space / Ergonomically...

Designed on the basis of FEM analyses, the MAXXTURN 25 meets the high demands of modern machining in an ideal manner. Maintenance-free roller guides in all linear axes ensure high stability and precision. Another advantage is offered by minimum lubricant consumption teamed with long tool lives. When it comes to shaft processing, the machine can be equipped with tailstock or counter spindle. The counter spindle offers the advantage of being able to finish the workpiece completely on all sides. This also includes drilling and milling operations on the rear side. / 12 position VDI 16 turret disc...

TECHNICAL HIGHLIGHTS MAIN SPINDLE COUNTER SPINDLE Being mounted on pre-stressed high-precision bearings, the main spindle can reach speeds ranging from 0–8000 rpm, making the production of small parts extremely economical and exact. The MAXXTURN 25 has a hydraulically operated hollow clamping cylinder with 25.4 mm bar clearance as standard equipment. A C-axis with holding brake is available as standard for milling operations. Resolution: 0.001°. The MAXXTURN 25 MY is also available in a tailstock version. The tailstock is set up on the linear roller slide and can be automatically positioned within...

The EMCO short bar loaders. Universal and powerful. SHORT AND TO THE POINT. The EMCO SL1200 is the perfect solution for automatic feeding and loading of cut-to-length bars. The key advantages are a small footprint and rapid loading times resulting from shorter strokes. for service purposes. Besides, it can comfortably be incorporated into the production process using the machine control‘s programme input masks. Minimum setup efforts are required when switching over to other bar diameters. The technology. The SL1200 can be used immediately as a “plug-and-play” solution. Their extremely small footprint...

TOOL HOLDERS For the complete processing of small complex components, a large number of stationary and driven tool holders are available. By using multiple tool holders, the number of tools on the turret can be increased considerably. FINISHED PART CONVEYOR The finished part pickup device deposits the parts on a belt conveyor. Clocking the beld prevents the parts, some of which are very complex, from falling on top of each other. HOLDING BRAKE AT THE MAIN SPINDLE For drilling and milling operations, the respective spindle is always positioned via the C-axis. In addition, the main spindle can...

Maxxturn 25 with SL1200 and chip conveyor Maxxturn 25 with counter spindle

TECHNICAL DATA Maxxturn 25 with tailstock Work area Tool turret Number of tool positions Swing over cross slide Number of indexing positions Main spindle / counter spindle distance Maximum turning diameter Tool cross-section for square tools Maximum part length Shaft diameter for boring bars Turret indexing time Driven tools Number of driven tools Feed drives Rapid motion speed X / Y / Z Feed force in the X / Y / Z axis Spindle nose Positioning spread according to VDI 3441 in X / Y / Z Spindle bearing Spindle bore hole Maximum drive power Speed range Main spindle Maximum torque Speed range Tank...

EMCO GmbH / Salzburger Str. 80 / 5400 Hallein-Taxach / Austria / T +43 6245891-0 / F +43 624586965 / [email protected] www.emco-world.com EN9055 . 03/22 . Subject to change due technical progress. Errors and omissions excepted. beyond standard