Flemco Flow Meter
6Pages

Emco Controls CONSTRUCTION AND DESIGN OF INSTRUMENTS FOR FLOW, LEVEL AND TEMPERATURE FLEMCO Flowmeter Typical Applications The FLEMCO flow meters measure the flow of most liquids and gases within the process industries, including chemical, petro-chemical, pharmaceutical and The FLEMCO is based on the principle of measuring velocity in the pipe line, therefore the flow measurement is volumetric. The FLEMCO flow meters are backed by international standards covering flow calculation, manufacturing tolerances, accuracy and installation requirements. This type of bare bone technology is world wide accepted and supported by millions of successful installations. The FLEMCO flow meter features are: Standardised product based on well proven technology. Compact design. Simple construction. Free choice for horizontal or Standardised construction The electronics delivers output signal linear to flow. Digital indicator for local flow reading. High accuracy. Wide rangeability. Model with integrated manifold valve. EMCO Controls A/S ■ Adalsvej 50, DK-2970 Horsholm • Phone: +45 4576 9400 ■ Fax: +45 4576 9401 ■ emco@emco.dk • www.emco.dk

Construction Model F1 The FLEMCO flow meter model F1 consists of a primary element based on the differential pressure principle, a 3 valve manifold valve and an electronic differential pressure transmitter with digital signal processing. Model F2 The FLEMCO flow meter model F2 consists of a primary element based on the differential pressure principle with an integrated 3 valve manifold valve and an electronic differential pressure transmitter with digital signal processing. The FLEMCO flow meter is mounted between flanges in sizes from DN 40 (1½") to DN 400 (16") in pressure ratings up to...

Technical data Sizes DN 40 - DN 400, 1½" - 16", larger sizes on request Pressure rating up to PN 40, 300 lbs, higher pressure ratings on request Process : -50 - +150°C, higher temperature with Remote Mounting Kit Mounting style Between flanges according to DIN or ANSI standards Flange facing flat face (standard), raised face, DIN 2512 N, DIN 2513 R Overall length Stainless steel AISI 316, others on request Design and calculation standards Vent or drain hole Pressure loss typical 150 mbar for liquid flow, and 50 mbar for gas flow (values are given at full flow) Allowable differential...

Sizes DIN flanges Size DN 40 DN 50 DN 65 DN 80 DN 100 DN 100 DN 125 DN 125 DN 150 DN 150 DN 200 DN 200 DN 200 DN 250 DN 250 DN 250 DN 300 DN 300 DN 300 DN 300 DN 350 DN 350 DN 350 DN 350 DN 400 DN 400 DN 400 DN 400 ANSI flanges Size

Overall dimensions Installation requirements The FLEMCO flow meter can be mounted in a horizontal or vertical pipe. For liquid flow in a horizontal pipe the electronics shall be mounted below the pipe. For gas flow in a horizontal pipe the electronics shall be mounted above the pipe. To insure high accuracy of measurement, long straight pipe runs upstream from the flow meter is necessary. The required straight pipe run depends on the disturbance upstream. To maintain the 1% accuracy the minimum straight pipe run upstream shall be 14 x inner pipe diameter and 6 x downstream If an additional...

FLEMCO coding 1. Type In AISI 316 with transmitter flange integrated manifold code code DN 40, DIN standard DN 50, DIN standard DN 65, DIN standard DN 80, DIN standard DN 100, DIN standard DN 125, DIN standard DN 150, DIN standard DN 200, DIN standard DN 250, DIN standard DN 300, DIN standard DN 350, DIN standard DN 400, DIN standard 1½”, ANSI standard 2”, ANSI standard 3”, ANSI standard 4”, ANSI standard 6”, ANSI standard 8”, ANSI standard 10”, ANSI standard 12”, ANSI standard 14”, ANSI standard 16”, ANSI standard code code code code code code code code code code code code code code code...