System Automation Test Place Automation Power Supply & Hardware Accessories General Overview . Power Supply . . . . . . . . . . . . . . . . . . . . . . 3 ICON 3000 . Hardware Accessories . EMC PARTNER’s Product Range . . System Automation: Test Place Automation

General Overview Test place automation is a category for equipment that can be used to enhance the four EMC PARTNER product ranges, Immunity, Lightning, Component and Emission. Included is equipment to increase personnel safety, link many instruments into a system and provide adjustable AC and DC power. As instrumentation, a power supply is available for use in all EMC applications. Test laboratories are confronted by a huge range of electrical and electronic products with vastly differing power requirements. Frequency and voltage combinations not available from the mains power outlet. Test samples...

Power Supply Overview PS3 Overview Electronic power supply requirements can differ between geographic boundaries and applications. Domestic, Telecom and Industrial supplies are generally 230V/50Hz or 115V/60Hz, Avionics 115V/400Hz and Railways in some countries use 16.7Hz. DC is also used for many of these applications. To cover all these frequency / voltage combinations, a rugged, flexible programmable power source is needed. PS3 delivers 3000W of single phase power in a compact laboratory instrument with the ability to switch quickly between power combinations. Applications - AC & DC Power...

Test System Features PS3 Power Supply has many unique and outstanding features: - Compact design only 2 units high - Pre-programed voltage / frequency combinations - 3000W capability - Frequency range DC to 400Hz - DC up to 350V - User defined selection button - Fast changing between output voltages. - Interfaces directly with magnetic field loop - Magnetic fields from 16.7Hz to 400Hz > 100A/m - Extendable with PS3-SOFTEXT to full Test system. - Frequency variation tests (with PS3-SOFTEXT) - Voltage variation tests (with PS3-SOFTEXT) - Single phase mains input 90V to 264V User Benefits The technical...

Flow Charts Z:\VK\Verkaufsinstrumente\Brochures\System Automation\System automation\PS3\PS3 Magnetic fields.flo Magnetic Field Testing FN October 9. 2008 Public power supply 115V 60Hz or 230V 50Hz Immunity tests: IEC 61000-4-16 Ed.2 INJECT IEC 61000-4-8 Ed.1 MF Railway Equipment Testing Z:\VK\Verkaufsinstrumente\Brochures\System Automation\System automation\PS3\PS3 TRA Rail Electronic.flo FN October 9. 2008 Public power supply 115V 60Hz or 230V 50Hz Immunity tests: IEC 61000-4-4 Ed.2 EFT IEC 61000-4-5 Ed.2 SURGE IEC 61000-4-11 Ed.2 DIPS System Automation: Test Place Automation Seite 1

Harmonics and Flicker Testing NW Z:\VK\Verkaufsinstrumente\Brochures\System Automation\Test Place Automation\PS3\PS3 Immunity.floOCT28 2008 Immunity Testing Emission measurements: IEC 61000-3-2 Harmonics IMMUNITY TESTS IEC 61000-3-3 Flicker System Automation: Test Place Automation

ICON3000 Description ICON3000 control and peak measuring system 19” plug-in 4 UH for use with Marx impulse generators, current generators and high voltage d.c. supplies. With rear plate, connector sockets and special interface. Three setting modes are possible for the test voltage: 1. Peak Voltage 2. Charging Voltage 3. Voltage per Stage Applications - Control of Insulation withstand test generators After the design and the production of an equipment, tests must be carried out to verify the insulation voltage withstand capability. - Control of energy impulse test generators (current generators)...

Hardware Accessories TC-MIG24 Test cabinet made of acrylic glass, for EUT with max. dimensions 30x20x20cm. Insulation withstand 1.2/50µs up to max. 36kV. With interlock safety switch and warning lamps green/red. Usable with all generators with output on top. TC-MIG24 HL Test cabinet for heavy loads, made of acrylic glass, for EUT with max. dimensions 30x20x20cm. Insulation withstand 1.2/50µs up to max. 36kV. With interlock safety switch and warning lamps green/red. Can be stood next to generator. COVER BOX SMALL / LARGE Cover box for generators with output on top. Dimensions: Cover Box Small...

CN-MIG24 EUT connection box with two test pistols, interlock and warning lamps green/red. Usable with MIG systems with output on top up to Vmax 18kV 1.2/50µs, Imax 8/20µs 1kA. Application limited to generators listed in the instruction sheet “CN-MIG24”. CN-MIG18 AMP Two test pistols for conducted tests. Cable length 1m with AMP plugs. The test pistols can be used together with MIG systems equipped with AMP plug outputs. CN-MIG18 SHOE Two test pistols, cable length 1.5m with cable shoes. The test pistols can be used together with MIG systems with TC-MIG24 for insulation tests. Can not be used...

AUX-SYNC-ADAPTER External synchronisation of generators with the AUX-SYNC-ADAPTER for 50/60Hz power supplies e.g. MIG1203CWG RS485-RS232 ADAPTER Serial convertor RS485 to RS232 to enable control of PS3 power supply from TRA3000 generator. USB-RS232 ADAPTER RS232 / USB adapter for remote control of EMCP generators from PC with USB. OPTICAL LINK Serial, optical connection between PC and generator, length 20 m. Incl. 1 Gender Changer f.-f. 25pole. OPTICAL LINK OPT- LINK-CTRL3000 Ethernet, optical connection between PC and generator equipped with CTRL300, length 10 m. System Automation: Test Place...

EMC PARTNER’s Product Range The Largest Range of Impulse Test Equipment up to 100kA and 100kV. Immunity Tests Transient Test Systems for all EMC tests on electronic equipment. ESD, EFT, surge, AC dips, AC magnetic field, surge magnetic field, common mode, damped oscillatory and DC dips. According to IEC and EN 61000-4-2, -4, -5, -8, -9, -10, -11, -12, -16, -18, -19, -29. Lightning Tests Impulse test equipment and accessories for aircraft, military and telecom applications. Complete solutions for RTCA / DO-160 and EUROCAE / ED-14 for indirect lighting on aircraft systems, MIL-STD-461 tests CS106,...