SEMI-AUTOMATIC SEALER TCE 270
1Pages

The semi-automatic sealer TCE 270 is a variant of the TCE 260. The conveyor replaces the carriage and allows to avoid the need for an operator in front of the sealing post. Experience acquired on the previous generation of heatsealers allowed us to design an even more reliable machine from a technical point of view while simplifying its use. Ergonomics and machine configuration have been also improved (addition of a tactile control screen). This machine is conceived for heatsealing pre-cut embossed aluminium seals on rigid jars. It exists by induction or by conduction depending on the nature of the jars to be sealed. The operator places the jar on the conveyor. Some sensors detect the jars and trigger the sealing operations. Holding, pre-cut seals adjusting on jars and sealing are made in a single operation. The sealing as well as the centering of the seal are perfectly repeatable. Then, the sealed jars are evacuated toward, either an operator in charge of capping the jars, or an accumulation table. The very quick and easy changes of size make this machine very versatile and flexible (diameters from 25 to 100 mm in standard). The module includes a vertical seals loader which has a capacity of about 500 to 800 seals and which is located at the front of the machine and so, it is easily interchangeable from one format to another. Packaging characteristics : Diameter : <100 mm Height (standard): < 240mm Plastic (glass and metal : please, come back to us for the range of induction sealers) Caracteristics: Size : 700 x 2000 x 800 mm Weight : 70 kg Power : 300 W Tension : 220 V monophase Required compressed air supply. ---