Catalogs >
EMAG GmbH & Co. KG >
Turning Machines - VL DUO line

Turning Machines - VL DUO line
8Pages

Catalog excerpts

MANUFACTURING SYSTEM FOR CHUCKED COMPONENTS

MAXIMUM FLEXIBILITY Each machine in the DUO line is conﬁgured individually to the manufacturing requirement. The entire list of options, which is also available for single machines, is freely available for every machine in the DUO line, including driven tools, Y-axis, probe, etc. The VL DUO line is available in the vertical turning machine versions VL 2, VL 4, VL 6 and VL 8 (depiction without safety fences). Stacker with up to 400 workpieces (VL 2) including TrackMotion automation system The Right Solution for Your Production Process Parts storage facility, automation system and machining –...

Open the catalog to page 2

Machining in the first clamping operation Machining in the second clamping operation WORKPIECE DIMENSIONS OF THE VL DUO line VL 8 DUO line 400 mm TECHNICAL DATA VL 2 DUO line VL 4 DUO line VL 6 DUO line VL 8 DUO line Chuck diameter Z-travel Y-travel (optional) Main spindle » Power rating at 40 % / 100 % » Torque at 40 % / 100 % » Speed, max. TrackMotion » Workpiece weight (gripper), max. » Horizontal travel speed » Vertical travel speed » Stroke in Z (TransLift) m/min ipm m/min ipm mm inch

Open the catalog to page 3

THE BENEFITS OF THE TRACKMOTION AUTOMATION SYSTEM TrackMotion: the Automation System for the VL DUO line + Minimal set-up time – the The TrackMotion is an automation solution which combines the previous concept of conveyor belts, pick-and-place units and changers in a single system. TrackMotion automation system is ready for use as soon as the workpiece height and part diameter have been entered + Universal NC gripper – no retooling required + Time saving by turning the workpiece during transport + Space-saving since the whole TrackMotion automation system is installed behind the machines...

Open the catalog to page 4

Linking the VL DUO line using the TrackMotion automation system EMAG TrackMotion – the highly ﬂexible automation system for the VL DUO line: TransLift, track and control unit

Open the catalog to page 5

Simple and reliable – TrackMotion replaces conveyor belts, changers and lifting units. High travel speeds ensure high productivity: horizontal: 150 m/min, vertical: 25 m/min. Use the Workpiece Storage for More Productivity The VL DUO line was specially developed for machining chucked parts in two clamping operations in medium to large series. The low cost, large workpiece storage means that the line can also manufacture autonomously until all the supplied raw parts have been machined which can take up to 3-4 hours (depending on the workpiece and tool). Resetting in a very short time All the...

Open the catalog to page 6

The raw parts are supplied by a parts storage facility. This has a capacity of up to 400 parts, depending on the geometry of the workpiece. From small to large with no retooling. The universal NC gripper ensures that the VL DUO line can be reset very quickly.

Open the catalog to page 7

EMAG Salach GmbH Salach Austrasse 24 73084 Salach Germany Phone: +49 7162 17-0 E-mail: info@salach.emag.com E-mail: info@frankfurt.emag.com Leipzig Pittlerstrasse 26 04159 Leipzig Germany Phone: +49 341 4666-0 E-mail: info@leipzig.emag.com E-mail: info@austria.emag.com Denmark Horsvangen 31 7120 Vejle 0 Denmark Phone: +45 75 854854 E-mail: info@sweden.emag.com E-mail: info@poland.emag.com Czech Republic Lolkova 766 103 00 Praha 10 - Kolovraty Czech Republic Phone: +420 731 476070 E-mail: mdelis@emag.com Market Companies NODIER EMAG INDUSTRIE 2, Parc des Fontenelles 78870...

Open the catalog to page 8

Turning Machines - VL DUO line 8Pages

Catalog excerpts

All EMAG GmbH & Co. KG catalogs and technical brochures

Turning Machines - VL DUO line
8Pages