e/umatec ^ THE PERFECT SOLUTION FOR EVERY REQUIREMENT

TABLE OF CONTENTS1|TECHNOLOGY 1.1 I TOOTH SHAPES Page 4 9.1 I TIPS FOR A PERFECT SAW CUT Page 26

Dear customer, machines from elumatec stand for quality and performance! To ensure this, suitable and tested tools are required. For this reason, we have compiled a selection of elumatec saw blades for you in this catalogue. All the recommendations given are geared towards sawing profiles. The underlying materials are aluminium profiles in wrought alloys and PVC profiles for window construction. For easy finding of the optimal saw blade, the saw blades are assigned to the machines. The saw blade that is supplied as standard with the machine is marked „Standard“. If you have any questions about...

Flat trapezoid ideal for cuts and end cuts Notch cut ideal for notches with sharp corners G4 produces minimal cutting pressure and small chips advantageous for thin-walled or solid profiles Carbide tipped Polycrystalline cutting material Diamond

d D = Outside diameter d = Bore W = Tooth width D Hole pattern saw blade Cutting angle positiv

2 | SAW BLADES FOR DOUBLE MITRE SAWS

2 | SAW BLADES FOR DOUBLE MITRE SAWS 2.2 | DOUBLE MITRE SAW DG 142 / DG 142 XL

2 | SAW BLADES FOR DOUBLE MITRE SAWS

2 | SAW BLADES FOR DOUBLE MITRE SAWS

3 | SAW BLADES FOR MITRE SAWS

3 | SAW BLADES FOR MITRE SAWS

3 | SAW BLADES FOR MITRE SAWS

3 | SAW BLADES FOR MITRE SAWS

4 | SAW BLADES FOR TABLE SAWS

5 | SAW BLADES FOR AUTOMATIC SAWS Hole pattern: Order no. 073311302 (standard) Z=110; W=3,8 mm; negative Order no. 072311306 Z=110; W=3,2 mm at the edge reduced to 2.4 mm; negative Tooth shape

5 | SAW BLADES FOR AUTOMATIC SAWS

6 | SAW BLADES FOR VEE-NOTCH SAWS

7 | SAW BLADES FOR NOTCHING SAWS

8 | SAW BLADES FOR PROFILE MACHINING CENTRES

8 | SAW BLADES FOR PROFILE MACHINING CENTRES

8 | SAW BLADES FOR PROFILE MACHINING CENTRES

8 | SAW BLADES FOR PROFILE MACHINING CENTRES

8 | SAW BLADES FOR PROFILE MACHINING CENTRES

8 | SAW BLADES FOR PROFILE MACHINING CENTRES

8 | SAW BLADES FOR PROFILE MACHINING CENTRES

Matt surface, glued chips • More oil • Sharpening saw blade Clean cutting surface Burr at saw blade exit Weniger Vorschub; • Less feed • More spray oil Mehr Sprühöl • More teeth Mehr Zähne Weniger Vorschub; Mehr Sprühöl Mehr Zähne Burr formation reduced Cutting surface with hammered texture Mehr Sprühöl Mehr Sprühöl Weniger Zähne • More spray oil • Less teeth Weniger Zähne Clean cutting surface Wool chips Weniger Zähne • Less teeth • Slower feeding

Perfect profile machining – since 1928.

The right to make technical alterations is reserved. | 2023-09 elumatec AG Pinacher Straße 61 75417 Mühlacker Germany