ER A / B / C / D / E / FINCREMENTAL LINEAR ENCODER MAIN FEATURES Incremental linear system based on optical or magnetic principle. Easy mounting due to to joint heads. • 0,01 mm max resolution (after quad eval) • Available with or without zero mark on left, right or central position • Up to 1 m/s travel speed • Working stroke up to 500 mm • Cable output, connector available on cable end • Mounting by joint heads SERIES incremental linear encoder ER RESOLUTION 0,2 mm A 0,1 mm B 0,04 mm C 1 mm D 0,5 mm E 0,2 mm F WORKING STROKE working stroke (mm) from 100 to 500 ZERO PULSE without zero pulse S (mod. A) central zero index C (mod. A) right zero index (closed position) D (mod. A) left zero index (open position) Z POWER SUPPLY 5 V DC 5 8 ... 24 V DC 8/24 ELECTRONIC INTERFACE (mod. A) NPN N (mod. A) NPN open collector C push-pull P line driver L FIXING HOLE DIAMETER mm 6 OUTPUT TYPE radial cable (standard length 1,5 m) P VARIANT custom version XXX © Copyright 2016 Eltra S.p.a. Unipersonale. All rights reserved. All informations in this catalog are subject to change without notice. Eltra takes no responsibility for typographic errors. For the terms of sales please check the website. REV. 160607 182

right zero index (piston closed) left zero index (piston closed) ELECTRICAL SPECIFICATIONS *output levels according to power supply, for further details please see under Technical basics section MECHANICAL SPECIFICATIONS © Copyright 2016 Eltra S.p.a. Unipersonale. All rights reserved. All informations in this catalog are subject to change without notice. Eltra takes no responsibility for typographic errors. For the terms of sales please check the website. REV. 160607 183