ilfcna® ftcujt} tti.'hvH'bii, EPLTLINEAR POTENTIOMETER WITH BALL TIP MAIN CHARACTERISTICS EPLT is an absolute linear potentiometer transducer. This model is characterized by the absence of cursor and the presence of a sensing system, composed by a moving rod, stainless steel sphere mounted on a threaded tip with a spring. This transducer is suitable for applications where short strokes are requested. The presence of the spring assures an automatic head positioning making this device suitable for being used in precise applications on cams or to control products coming from automatic production line. EPLT is also characterized by the absence of variations on the electrical output signal outside of the theoretical electrical stroke. ORDERING CODE EPLT 100 X 10 SERIES linear potentiometer with ball tip EPLT STROKE 10 / 25 / 50 / 75 / 100 please contact our offices for other strokes ENCLOSURE RATING IP 40 X TRAVEL SPEED max speed 10 m/s 10 OUTPUT TYPE cable (standard length 1 m) P M16 DIN 43322 5 pin connector C5 OUTPUT DIRECTION axial A © Copyright 2016 Eltra S.p.a. Unipersonale. All rights reserved. All informations in this catalog are subject to change without notice. Eltra takes no responsibility for typographic errors. For the terms of sales please check the website. REV. 160607 198

dimensions in mm ■ fixing kit (brackets, M4x10 screws, washer) and tip with ball included ■ female connector not included, for ordering P/N please refer to Accessories section C5 connector (5 pin) DIN 45322 solder side view FV Important: datas are valid if the transducer is used as a ratiometric device with a maximum applicable current < 0,1 pA LINEAR TRANSDUCERS I EPLT ELECTRICAL SPECIFICATIONS MECHANICAL SPECIFICATIONS Stroke Travel speed Enclosure rating Shock Vibration Displacement force Housing material Life Operating temperature Storage temperature anodized aluminium / Nylon 66 G 25 1.4305...