EPLCRODLESS LINEAR POTENTIOMETER MAIN CHARACTERISTICS EPLC is an absolute linear potentiometer transducer without internal rod. This transducer is characterized by a cursor with integrated coupling sliding on the axis. The main characteristic is the absence of variations on the electrical output signal outside of the theoretical electrical stroke. ORDERING CODE EPLC 500 X 4 C4 SERIES rodless linear potentiometer model EPLC STROKE mm from 100 to 1500 see table for stroke availability ENCLOSURE RATING IP 40 X TRAVEL SPEED max speed 10 m/s 4 max speed 10 m/s 10 OUTPUT TYPE DIN 43650-A 4 pin connector C4 M16 DIN 43322 5 pin connector C5 OUTPUT DIRECTION axial A =Eltna* © Copyright 2016 Eltra S.p.a. Unipersonale. All rights reserved. All informations in this catalog are subject to change without notice. Eltra takes no responsibility for typographic errors. For the terms of sales please check the website. REV. 160607 196

LINEAR TRANSDUCERS | EPLC EPLC ELECTRICAL SPECIFICATIONS ! Resolution Independent linearity Repeatability Resistance tolerance Recommended cursor current Resistance temperature coefficient Output voltage temperature coefficient Power dissipation Max cursor current Applicable voltage Electrical insulation Dielectric strenght virtually infinite ± 0,05 % 0,01 mm ± 20 % < 0,1 µA -200 ... 200 ppm / °C typical ≤ 5 ppm / °C typical 3 W at 40 °C / 0 W at 120 °C 10 mA max 60 V max > 100 MΩ, 500 VDC, 1 bar, 2 s < 100 µA, 500 VAC, 50 Hz, 1bar, 2 s MECHANICAL SPECIFICATIONS 100 - 150 - 200 - 300 - 400 - 500...